Universal Serial Bus Connectors; Video Connector - IBM 9228 - IntelliStation Z - Pro User Manual

Universal Serial Bus connectors

There are seven USB 2.0 connectors in the computer, two on the front, four on the
rear, and one internal USB connector. Use the USB connectors to connect optional
telephony and multimedia devices. USB 2.0 technology transfers data at up to 480
Mbps (megabits per second) with a maximum of 127 external devices, and a
maximum signal distance of 5 meters (16 ft) per segment (if the device that is
attached to the computer is a USB 2.0 device). If multiple USB devices are
attached to the computer, the USB hub must be USB 2.0; otherwise, all USB 2.0
devices will transfer data at 12 Mbps. Using Plug and Play technology, USB devices
are configured automatically. The following illustration shows a USB connector.
Use a 4-pin USB cable to connect an external device to a USB connector.

Video connector

The PCI Express x16 adapter (slot 1) provides the video connector. This connector
is on the rear of the computer. Use the video connector to connect a monitor or
other display device. The following illustrations show examples of different video
connectors.
Analog video connector
Digital (DVI-I) video connector
Dual monitor system-59 (DMS-59) video connector
1 4
5 1
15 11
1 C1 C2
C3 C4
C5
Chapter 4. Installing options
63