Disk Drive Bezels and Fillers
Each disk drive slot in the Model 275 must contain either a disk drive or the appropriate filler panel.
Installing a Disk Drive Bezel to a Disk Drive
To install a disk drive bezel to a disk drive, do the following:
1. Remove the disk drive filler panel from the slot you want to use.
2. Remove the disk drive bezel plug from the front of the filler panel.
3. Remove the disk drive bezel from the front edge of the filler panel.
4. Attach the disk drive bezel to the front of the disk drive.
5. Follow the procedures for adding a disk drive as described in "Hot-Plug Disk Drives" on page 47.
2
1
3
1 Filler Panel with Bezel Attached
2 Disk Drive Bezel Plug
3 Disk Drive Bezel
2
1 Disk Drive Bezel
2 Disk Drive
4
1
Chapter 3. Installing Options
45