Table of Contents
Advertisement
8
Getting Started
Quick Installation
• Brief instructions on how to get to work with the FireGL card
in the shortest possible time.
• Recommended for experienced users and system
administrators only.
• For more detailed information on installation and operation
of your graphics accelerator, please refer to Chapter 2 and
Chapter 3.
Installation Steps
1
2
3
4
5
6
7
If you are replacing an existing graphics card, un-install the
drivers and software for your old graphics card.
Disable any on-board graphics solution on the
motherboard.
Shut down and disconnect your computer system.
Remove the installed (AGP or PCI) graphics card.
Install the new FireGL card.
Reassemble and connect your computer system.
Install the FireGL drivers and configuration software from
the ATI INSTALLATION CD-ROM:
- automatic ATISETUP utility or
- Start > Run > X:\ATISETUP.EXE
where X is the drive letter of your CD-ROM drive
Advertisement
Table of Contents
