ATI Technologies 100-505181 - FireGL 256 MB PCI-Express Card User Manual page 22

18 Installing the Hardware and Software
5
• Locate the AGP slot. Refer to your computer's manual for
more information.
• If necessary, remove the metal slot cover from the AGP slot.
Save the screw to secure the graphics card later.
• Align the FireGL card with the AGP slot, and
press it in firmly until fully seated.
Insert the card into the AGP slot.
Note: The FireGL card fits in either AGP 8x or AGP 4x
slots.
AGP cards are designed to fit one way only. Be sure
your card is properly aligned.
Grasp the card by the top edge and carefully seat it into
the AGP slot. Be sure the metal contacts are completely
pushed into the slot.
1 FireGL card
2 AGP expansion slot