Installing The Software - ATI Technologies 100-505181 - FireGL 256 MB PCI-Express Card User Manual

Installing the Software

• Before you Start: Information, Tips, and Hints
• Software Installation for Windows 2000 and Windows XP
You will need to install the FireGL drivers and software in the
following cases:
• After you have installed the card in your system.
• After you have re-installed or upgraded your operating
system.
(1) To install or remove the FireGL drivers, you
need administrator rights or you must be logged on
as a user with administrator rights under Windows
2000 and Windows XP.
(2) Information for Windows 2000:
You must have Microsoft Windows Service Pack 1
(or higher) installed prior to installing the FireGL
drivers.
i
The Service Pack is available from Microsoft's web
site, www.microsoft.com.
(3) Linux drivers and installation instructions are
available for downloading from
www.ati.com/support.
(4) The most recent certified FireGL drivers are
available from www.ati.com/FireGL
Installing the Hardware and Software 23