20
Installing the Hardware and Software
Connecting the Cables and Completing the Installation
Connecting the Monitor Cables
You may connect one or two monitors, either DFP/digital CRT
or analog VGA to the FireGL™ card. Use the provided DVI-to-
VGA adapters to connect monitors with a VGA connector.
Securely attach the data cable of your first monitor to the DVI
output connector (1) on the card. Attach the cable to the monitor
according to the monitor's instructions. Refer to the
documentation that came with your monitor if you need
additional installation information.
Connect the data cable of your second monitor to the DVI
output connector (2) on the card.
FireGL X2-256, FireGL X1-128, FireGL Z1-128
FireGL X2-256t
If you connect only one monitor, make sure to
i
connect it to DVI connector (1) on the card.