7-3. Related Laws and Regulations
As nailers and staplers are designed to instantaneously drive nails and staples, there is an ever-present danger of
misfiring and subsequent possible serious injury. Accordingly, close attention in handling is absolutely necessary
at all times. Carefully ensure that the customer is fully aware of the precautions listed in the Instruction Manual
provided with each unit.
While there are no specific safety regulations, there are related items in various general safety regulations with
which the salespersons should be familiar in order to properly advise the customer. Please check your national
and/or local regulations for applicable items.
Some applicable items are outlined below.
The U.S.A.:
OSHA
ANSI SNT-101-2002
8. MECHANISM AND OPERATION PRINCIPLE
8-1. Mechanism
As illustrated in Fig. 4, the Model NT 65MA3 can be generally divided into four sections: output section, control
valve section, driving section, and magazine section. The basic construction of the Model NT 65MA3 is the same
as that of the Model NT 65MA2 and the interchangeable components are used as much as possible. Primary
differences from the Model NT 65MA2 are described below.
Output section
• • • • • • • • • • • • •
Control valve section
Driving section and magazine section
1926.102 Eye and face protection
1926.302 Power-operated hand tools
Portable, Compressed-Air-Actuated,
Fastener Driving Tools-Safety Requirements for
Following parts were changed.
Body: Newly designed
Exhaust cover: Newly designed
Grip rubber: Newly designed
Top cover: Newly designed
Cap (A): Newly designed
Common to the Model NT 65MA2
• • • •
• • • • • • • • • • • • •
Almost common to the Model NT 65MA2
--- 8 ---
Need help?
Do you have a question about the NT65MA3 - 2-1/2 Angled Finish Nailer and is the answer not in the manual?
Questions and answers