Related Laws And Regulations - Hitachi NR90GC - 3-1/2" Gas Powered Clipped Head Framing Nailer Technical Data And Service Manual

Gas strip nailer
Hide thumbs Also See for NR90GC - 3-1/2" Gas Powered Clipped Head Framing Nailer:
Table of Contents

Advertisement

7-3. Related Laws and Regulations

As nailers and staplers are designed to instantaneously drive nails and staples, there is an ever-present danger of
misfiring and subsequent possible serious injury. Accordingly, close attention in handling is absolutely necessary
at all times. Carefully ensure that the customer is fully aware of the precautions listed in the Handling Instructions
provided with each unit.
While there are no specific safety regulations, there are related items in various general safety regulations with
which the salespersons should be familiar in order to properly advise the customer. Please check your national
and/or local regulations for applicable items. Some applicable items are outlined below.
The U.S.A:
OSHA
ANSI SNT-101-2002
The Europe
EN 712-13 2000
EN 50260-1 2002
75/324/EEC 1975
1926.102 Eye and face protection
1926.302 Power-operated hand tools
Portable, Compressed-Air-Actuated,
Fastener Driving Tools-Safety Requirements for
Hand-held-non-electric power tools
Safety of hand-held battery-powered motor operated tools and battery packs
< Certificate No. FI 21611 by SGS Fimko Ltd./Finland >
Aerosol Dispensers
At 50ûC, the pressure in the aerosol dispenser must not exceed 12 bars
8 bars/35ûC
--- 8 ---

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nr 90gc

Table of Contents