5-3. Nail Selection
The Model NT 65MA3 utilizes small-head, T-shaped nails (finish nails) collated by tapes. Applicable nails are
shown below.
CAUTION: Ensure that nails are as specified in Fig. 1. Other nails will cause clogging of nails and
subsequent damage to the nailer.
5-4. Examples of Nail Use
A: Crown molding
Fig. 2 Examples of molding
15-gauge finish nail (collating angle 34û)
Min.
Fig. 1 Dimensions of nails
B: Base molding
Examples of uses for the nails shown in 5-2 for
installing finish materials, or molding as shown in Fig. 2.
Typical mounting methods are shown in circles A and B.
--- 4 ---
Max.
Need help?
Do you have a question about the NT65MA3 - 2-1/2 Angled Finish Nailer and is the answer not in the manual?
Questions and answers