5. SPECIFICATIONS
5-1. Specifications
(1) Gas nailer
Model
Driving system
Weight
Dimensions
(Length x Height x Width)
Nail feed system
Nail capacity
Packaging
Package dimensions
(Length x Height x Width)
Standard accessories
Optional accessories
5-2. Explanation of the Nailing Action
To meet the requirements of "ANSI SNT-101-2002" (USA), the Model NR 90GC is equipped with FULL
SEQUENTIAL ACTUATION MECHANISM.
FULL SEQUENTIAL ACTUATION MECHANISM
First, press the pushing lever against the wood; next, pull the trigger to drive the nail. After nailing once,
nailing will not be possible again until the trigger is released and pressed again.
Reciprocating piston type
3.5 kg (7.7 lbs.)
347 mm x 353 mm x 108 mm
(13-21/32" x 13-29/32" x 4-1/4")
Spiral spring
37 nails (1 strip)
Plastic case
500 mm x 460 mm x 150 mm
(19-11/16" x 18-5/32" x 5-29/32")
- For North America -
Safety glasses (Code No. 875769)
Battery (Code No. 324147)
Charger UC 7SD
Case (Code No. 885360)
Allen wrench for M5 screw
(Code No. 944458)
- For North America -
Lubricant oiler (A) (Code No. 885546)
Fuel cell (Code No. 728980)
Grease (Code No. 317918)
NR 90GC
- For Europe -
Safety glasses (Code No. 885549)
Battery (Code No. 324148)
Charger UC 7SD
Case (Code No. 885360)
Allen wrench for M5 screw
(Code No. 944458)
- For Europe -
Lubricant oiler (A) (Code No. 885246)
Fuel cell (Code No. 753600)
Grease (Code No. 317918)
--- 2 ---