Disassembly And Reassembly Of Chamber - Hitachi NR90GC - 3-1/2" Gas Powered Clipped Head Framing Nailer Technical Data And Service Manual

(3) Disassembly and reassembly of Chamber [24] and the related parts (Fig. 47)
[Tools required]
Hex. bar wrench (3 mm (0.118"))
Phillips screwdriver
(a) Disassembly
Remove the Hex. Socket Hd. Bolt M4 x 16 [21]. Then the Chamber Head [22], Gasket (A) [23] and Chamber
[24] can be removed.
Remove the Machine Screw M4 x 6 [33]. Then the Chamber Lock Plate [32] can be removed.
Hex. Socket Hd.
Bolt M4 x 16 [21]
Chamber Head [22]
Gasket (A) [23]
Chamber [24]
Fig. 47
--- 52 ---
Chamber Lock
Plate [32]
Machine screw
M4 x 6 [33]