Verifying Virtual Disks From The Host - HP 6100 User Manual

50001fe1002709e9,5
Emulex (lpfc)/QLogic (qla2300) drivers:
◦ You can retrieve the WWPN by checking the assignment in the driver configuration file
(the easiest method, because you then know the assigned target) or by using
HBAnyware/SANSurfer.
You can retrieve the WWLUN ID by using HBAnyware/SANSurfer.
◦
You can also retrieve the WWLUN ID as part of the format -e (scsi, inquiry) output;
however, it is cumbersome and difficult to read. For example:
09 e8 20 04 00 00 00 00 00 00 35 30 30 30 31 46
45 31 30 30 32 37 30 39 45 30 35 30 30 30 31 46
45 31 30 30 32 37 30 39 45 38 36 30 30 35 30 38
42 34 30 30 31 30 33 30 45 34 30 30 30 30 35 30
30 30 30 30 42 32 30 30 30 30 00 00 00 00 00 00
◦ The assigned LUN is part of the device file name. For example:
/dev/dsk/c4t20d5s2

Verifying virtual disks from the host

Verify that the host can access virtual disks by using the format command. See
command".
96 Configuring application servers
.........50001F
E1002709E050001F
E1002709E8600508
B4001030E4000050
0000B20000
Example 5 "Format