Power Specifications - HP 6100 User Manual

Table 33 Environmental specifications
Operating Temperature
Shipping Temperature
Humidity
Shipping Humidity
Altitude
Air Quality

Power specifications

The input voltage is a function of the country-specific input voltage to Enterprise storage system
rack power distribution units (PDUs).
the drive enclosure power supplies.
CAUTION:
the possibility of an overload condition. Changing the cabling to or from a PDM could cause an
overload condition.
Table 34 Enterprise storage system AC input line voltages
Specification
AC Line Voltage
AC Line Voltage—Japan
AC Line Voltage–North America
AC Line Voltage–Europe
AC Line Frequency
AC Line Voltage–Japan
AC Line Voltage–North America
AC Line Voltage–North America
AC Line Voltage–Europe
Table 35 Power Data (North America/Europe/Japan) maximum configuration
AC plug type (quantity 2)
Number of phases
Rated current
Nominal Line Voltage
Range Line Voltage
Line Frequency
50° to 95° F (10° to 35° C) - Reduce rating by 1° F for each 1000 ft. altitude (1.8°
C/1,000 m)
-40° to 150° F (-40° to 66° C)
10% to 90% non-condensing
5% to 90% non-condensing
Up to 8,000 ft. (2,400 m)
Not to exceed 500,000 particles per cubic foot of air at a size of 0.5 micron or larger
The AC power distribution within a rack ensures balance to each PDA and reduces
North America – 3 wire NEMA No. L6-30P, 30 amp (208 to 240V 50–60Hz 30A)
Europe – 3 wire, 2 pole IEC 309, 30 amp, (220 to 240V 50Hz 32A)
Single
17A @ 200V-240V AC, 60Hz total, 4.25 A per power cord
North America – 208 or 230V
Europe – 230V
Japan – 206V
187 to 256V
North America 60Hz, Europe 50Hz, Japan 50 or 60 Hz
Table 34 (page 119) defines the AC input power available to
Minimal
60 Hz service
57 Hz
180 VAC
180 VAC
208 VAC
50 Hz service
47 Hz
180 VAC
190 VAC
200 VAC
208 VAC
Nominal Maximum
60 Hz 63 Hz
202 VAC 220 VAC
208 VAC 220 VAC
240 VAC 254 VAC
50 Hz 53 Hz
202 VAC 220 VAC
220 VAC 235 VAC
230 VAC 244 VAC
240 VAC 254 VAC
Storage system specifications 1 19