Chapter 2. Disassembly
3. Presser foot mechanism
!1
i
!2
!0
1. Loosen the nut q, remove the adjust screw w, the spring guide e, and the spring r by lifting them from above of the
machine, and remove the washer t.
2. Loosen the bolt u of stepping work clamp arm R y, remove the shoulder screw i and the retaining ring !0 of the
presser bar lifter o from the faceplate, and then remove stepping work clamp arm F !1 and stepping link assy !2 .
3. Push up the presser bar !3 , and separate it from the presser bar bush !4 .
(The presser bar lifter o, the cushion !5 , and the needle bar clamp !6 will come off as a set.)
14
w
q
e
r
t
!6
!5
o
!4
!3
BAS-311E.311EL.326E.326EL
u
y