Brother BAS-311E Service Manual page 36

Chapter 3. Assembly
!2
!7
@0
!9
28
q
!4
@1
!8
@2
t
@0
!9
BAS-311E.311EL.326E.326EL
9. Attach the tension release assembly q to the machine
body with the screw !2 .
10.Attach the cord holder !3 to the machine body.
11.Attach the tension release bar !4 , the pin !5 and the
thread tension assembly !6 to the machine. Fit the set
screw ! 7 in the groove of the thread tension assembly
!6 , then tighten it.
!5
!6
12.Turn the stepping solenoid ! 8 fully in the direction of
the arrow. Move the lifter lever t so that there is no
clearance (0 mm) between work clamp lifter lever !9
and the presser bar clamp @ 0 , remove the slack from the
work clamp lifter wire @ 1 , and tighten the bolt @ 2 .