Brother BAS-311E Service Manual page 41

Feed mechanism (X axis) 311EL, 326E
!3
1. Place X-timing belt B326 w between the two timing belt spacers e on the back of the X-feed bracket q. Align a
rectangular slot of the belt holder r with a tooth of X-timing belt B326 w, and secure them using the bolt t.
2. Fit timing X-timing belt B326 w in X-pulley bracket R y, pass X-pulley shaft R u through the micro bearing i, timing
pulley B o, and the micro bearing i, and attach the retaining ring !0 .
3. Place X-timing belt B326 w and X-timing belt A326 !2 on X-pulley bracket L !1 , pass the X-timing pulley shaft !3
through the micro bearing ! 4 , timing pulley A ! 5 , X-timing pulley B326 ! 6 , and the micro bearing ! 4 , and attach the
retaining ring !7 .
!6
w !5
!1
!4
BAS-311E.311EL.326E.326EL
q
!2
!4 !7
e
r
t
i
!0
Chapter 3. Assembly
o
u
i
y
33