Philips SRC2063WM User Manual page 8

During initial setup
1
2
• I f the button still does not function as
After initial setup
1
2
3 K eep buttons
4 P ress and hold the button that does not
• I f the button still does not function as
5
8
P2063WM_17__Manual 8
M ake sure the receiving device is able to
respond. E.g. when you try to repair the Play
button for your DVD player, make sure to
insert a DVD into the DVD player otherwise
the Play button is not able to function.
P ress the button that does not function, keep
it pressed and immediately release it when
the device responds. Repeat this for every
button that does not function.
expected, try pressing it again for a longer
period of time.
M ake sure the receiving device is able to
respond. E.g. when you try to repair the Play
button for your DVD player, make sure to
insert a DVD into the DVD player otherwise
the Play button is not able to function.
S elect the device
that you wish to
operate (e.g. DVD).
P ress the
device selection
button to select
DVD.
and pressed
simultaneously for
5 seconds.
• T he red Setup
light lights
up. The remote control is now in setup
mode.
function and immediately release it when the
device responds.
expected, try pressing it again for a longer
period of time.
P ress the
selection button
twice to save your
settings and exit
setup mode.
• W hen no
button is pressed for 5 minutes or more,
the remote control will exit setup mode,
automatically saving all your settings.
EN
or
5 sec.
or
2 x
25-11-09 13:1