For Network Users; Web Based Management; Web Browser; Factory Default - Brother HL-5470DW Quick Setup Manual

For Network Users

Web Based Management

(web browser)

The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
We recommend Windows
®
Explorer 7.0/8.0 or Firefox
and Safari 4.0/5.0 for Macintosh. Please also
make sure that JavaScript and Cookies are
always enabled in whichever browser you use. To
use a web browser, you will need to know the IP
Address of the print server. The IP Address of the
print server is listed on the Printer Settings Page.
a
Open your browser.
b
Type "http://machine's IP address/" into your
browser's address bar (where "machine's IP
address" is the IP address of the Brother
machine or the print server name).
 For example: http://192.168.1.2/
Note
If you have configured an optional login
password, you must enter it when prompted to
access the Web Based Management.
For more information, see Web Based
Management in the Network User's Guide.
®
Internet
® ®
3.6 for Windows
Reset the network settings to the

factory default

To reset all network settings of the print server to its
factory default, follow the steps below.
a
Press a or b to choose Network.
Press OK.
b
Press a or b to choose Network Reset.
Press OK.
c
When Reboot OK? appears, press a to
choose Yes for reboot.
The machine will re-start.

Print the Printer Settings Page

The Printer Settings Page lists all the current printer
settings, including network settings.
a
Press a or b to choose Machine Info..
Press OK.
b
Press OK to choose Print Settings.
The machine will print the current printer
settings.
Note
If the IP Address on the Printer Settings Page
shows 0.0.0.0, wait for one minute and try again.
31