Brother HL-5470DW Quick Setup Manual page 30

Wireless Network
Install the Printer Driver for Macintosh
12
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
Important
For users of Mac OS X 10.5.7 or lower, upgrade
to Mac OS X 10.5.8 - 10.7.x. (For the latest
drivers and information for the Mac OS X you are
using, visit http://solutions.brother.com/.)
Note
If you want to add the PS driver (BR-Script3
printer driver), please go to the Brother Solutions
Center at http://solutions.brother.com/ and visit
FAQ's on your model page for instructions.
13
Install the printer driver
a
Put the installer CD-ROM into your CD-ROM
drive.
b
Double-click the Start Here OSX icon. If
prompted, select your model.
c
Choose Wireless Network Connection and
then click Next.
d
Follow the on-screen instructions.
Important
DO NOT cancel any of the screens during the
installation. It may take a few minutes for the
installation to complete.
Note
If your wireless settings fail, the Wireless Device
Setup Wizard screen appears. Follow the
on-screen instructions to complete the wireless
configuration.
30
e
Choose your machine from the list, and then
click OK.
Note
• If there is more than one of the same model
connected on your network, the MAC Address
(Ethernet Address) will be displayed after the
model name.
• You can find your machine's MAC Address
(Ethernet Address) and IP Address by printing
out the Printer Settings Page. See Print the
Printer Settings Page on page 31.
f
When this screen appears, click Next.
Note
When the Brother Support screen appears,
make your selection and follow the on-screen
instructions.
The installation is now
Finish
complete.
Note
If you began the wireless setup from step 5 on
page 5, go back to step 6 to continue the machine
setting.
Macintosh