Konica Minolta bizhub PRO 950 User Manual page 75

Installation of the printer driver (Macintosh)
Specifying the AppleTalk settings
Enable AppleTalk in "AppleTalk Setting", and then enter the printer name.
For details on the AppleTalk settings of this machine, refer to the User's
Guide [Network Administrator].
Specifying the AppleTalk settings for the computer
1
On the "Apple" menu, select "System Preferences".
2
Click the "Network" icon.
3
From "Show", select "Built-in Ethernet".
4
Click the AppleTalk tab, and then select the "Make AppleTalk Active"
check box.
5
Click the close button at the upper left corner of the dialog box.
– When the "Apply configuration changes?" message appears, click
the [Apply].
Adding a printer
1
Select "HDD" - "Applications" - "Utilities" where the driver was in-
stalled, and then double-click "Printer Setup Utility" to open it.
2
When the Add Printer dialog box appears, click the [Add]. When the
printer list appears, click the [Add].
The connected printers are detected.
3
Select [AppleTalk] as a connection method, and then select an intend-
ed printer name from among those detected.
4
Select "KONICA MINOLTA" in "Printer Model", select the desired mod-
el from the list of models, and then click the [Add].
– If the selected printer is registered in the printer list, the setting pro-
cedure is completed.
bizhub PRO 950
5
5-11