PostScript PPD Printer Driver setting (Mac OS X)
Fold
Various ways of the folding can be setup.
The [Fold] cannot be set in the following cases:
- When any item other than [Off] is selected for the [Staple], [Hole-Punch],
only [Z-Fold] can be selected.
- When any item other than [Off] is selected for the [Front Cover], [Back
Cover], [PI Front Cover Tray] and [PI Back Cover Tray].
The setting of [Fold] is available when the following unit is installed.
Z-Fold
Multi-Letter Fold (In/Out)
Multi-Half Fold
bizhub PRO 950
Z-Fold
Center Staple and Fold
Multi-Letter Fold in
Multi-Letter Fold Out
Multi-Half Fold
Punch Z-Fold Unit
o
Finisher (FS-611)
o
o
10
10-25