Uninstallation By An Installer (Pcl) - Konica Minolta bizhub PRO 950 Quick Manual

6
6.2

Uninstallation by an installer (PCL)

If the printer driver was installed with an installer, it can be deleted by the in-
staller.
1
Insert the Driver CD into the CD-ROM drive of the computer.
– Check that the installer starts up, and then continue with step 2.
– If the installer does not start up, open the printer driver folder on the
CD-ROM and double-click "Setup.exe" for the 32bit editions OS
and "Setup64.exe" for the 64bit editions OS, and then proceed to
Step 3.
2
Click "Printer Install".
The installer of the printer driver starts.
3
Click the [Agree] on the installation license agreement screen.
4
In the setup selection dialog box, select "Uninstall Printer Driver", and
then click the [Next].
5
Select the components to be deleted, and then click the [Delete].
– Follow the on-screen instructions.
6
If the restart screen appears, click the [OK] to restart the computer.
6-2
Uninstallation of the printer driver
bizhub PRO 950