Cisco PVDM2 24DM - Digital Modem Module User Manual page 7

Cisco PVDM2-12DM, PVDM2-24DM, and PVDM2-36DM Digital Modem Packet Voice Data Modules
DETAILED STEPS
Command or Action
Step 1 line start-range end-range
Example:
Router(config)# line 334 345
Step 2
modem inout
Example:
Router(config-line)# modem inout
Step 3
transport input all
Example:
Router(config-line)# transport input all
Configuring Modems for Dial-Out
To configure the modem lines for dial-out, perform the following tasks, beginning in global configuration
mode:
SUMMARY STEPS
1.
2.
3.
4.
DETAILED STEPS
Command or Action
Step 1
line start-range end-range
Example:
Router(config)# line 322 333
Step 2
rotary number
Example:
Router(config-line)# rotary 1
line start-range end-range
rotary number
transport input telnet
modem inout
How to Configure Digital Modem PVDM2s
Purpose
Selects the modem lines for dial-in and switch to the line
configuration mode.
Configures the line for both incoming and outgoing calls.
Selects the protocol used to connect to the router. all selects
all protocols.
Purpose
Selects the modem lines for dial-out and switch to the line
configuration mode.
Sets the router to use previously-defined rotary group.
Cisco IOS Release 12.4(9)T, 12.4(11)XW, and 12.4(20)T
7