Cisco PVDM2 24DM - Digital Modem Module User Manual page 34

show modem configuration (pvdm2)
Table 2
S Register
S39
S40
S41
S46
S48
S82
S86
S91
S92
S95
S200
S202
S210
S220
S221
S222
S223
S224
Related Commands Command
show modem log (pvdm2)
show modem operational-status
(pvdm2)
Cisco IOS Release 12.4(9)T, 12.4(11)XW, and 12.4(20)T
34
Cisco PVDM2-12DM, PVDM2-24DM, and PVDM2-36DM Digital Modem Packet Voice Data Modules
show modem configuration Field Descriptions for V12 Modems (continued)
Field
Flow Control Bit Mapped
Options Sta'tus
General Bit Mapped Options
Status
General Bit Mapped Options
Status
Error Correction Protocol
V42 Negotiation
Break Handling Options
Call Failure Reason Code
PSTN Transmit Attenuation
Level in Analog Modulations
Fax Transmit Attenuation Level
Extended Result Codes
Disable K56Plus Protocol
CSM Bit Mapped Control
Register
Symbol Rate Limit
Duration of Answer Tone
Duration of Billing Delay
General Purpose Register
V.90 PCM Transmit Level
Adjust
Digital Detect Timer
Description
Displays the modem history event status performed on a
manageable modem or group of modems.
Displays the current modem operational status for V12 digital
modems on PVDM2-xxDM devices.
Description
Status of flow control.
MNP extended services, block size, and break
handling.
Compression selection, auto retrain, fallback/fall
forward.
Default is 138 (execute protocol with compression).
Default is 7 (negotiate).
LAPM Break Control.
Default is 21 (clear previous reason value).
0 to 20 (0 to -20 dBm transmit level). Default is 10
(-10 dBm).
10 to 15 (-10 to -15 dBm transmit level). Default is 10
(-10 dBm).
Indicates overriding of Wn command options.
Default is 223 (enables).
Controls K56flex/V90 Tx level and automatic
CX802xx/CX803xx status response.
V34 symbol rate limit, symmetric or asymmetric.
Command is in units of 450 ms. Default is 11
(4950 ms).
0 to 255 in 10 ms increments. Default is 50 (500 ms).
Status of Lucent negotiation with V.8bis.
0 to -16 dBm. Default is 23 (-12 dBm).
Autodetects incoming call from ISDN V110/V120 or
analog modem. 0 to 100 in 100 ms increments. Default
is 0.