Install The Switch On A Wall - Cisco PIX 520 - PIX Firewall 520 User Manual

Chapter 3 Installing the Switch

Install the Switch on a Wall

Step 1
If you are wall-mounting a Catalyst Express 520-8PC-K9 switch, order the bracket kit from
Cisco. The kit part number is RCKMNT-19-CMPCT=.
For the other Catalyst Express switches, locate the brackets and hardware in the accessory kit.
Step 2
Use the Phillips flat-head screws,
included in the bracket kit, to attach
a 19-inch bracket to each side of the
switch.
OL-12761-02
Prerequisites
Installing the Catalyst Express 520-8PC-K9 switch in a 19-inch rack requires
•
19-inch rack-mounting brackets and hardware that are not shipped with the
switch. You can order a bracket kit from Cisco. The kit part number is
RCKMNT-19-CMPCT=.
The other Catalyst Express switches ship with brackets and hardware.
You need to supply screws to attach the brackets to the wall.
•
Follow these steps:
User Guide for the Catalyst Express 520 Switches

Install the Switch on a Wall

3-11