Cisco PIX 520 - PIX Firewall 520 User Manual page 44

Warnings
Class 1 laser product. Statement 1008
Warning
Warning This unit is intended for installation in restricted access areas. A restricted
access area can be accessed only through the use of a special tool, lock and
key, or other means of security. Statement 1017
The plug-socket combination must be accessible at all times, because it serves
Warning
as the main disconnecting device. Statement 1019
This equipment must be grounded. Never defeat the ground conductor or
Warning
operate the equipment in the absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority or an electrician if you
are uncertain that suitable grounding is available. Statement 1024
This unit might have more than one power supply connection. All connections
Warning
must be removed to de-energize the unit. Statement 1028
Only trained and qualified personnel should be allowed to install, replace, or
Warning
service this equipment. Statement 1030
Ultimate disposal of this product should be handled according to all national
Warning
laws and regulations. Statement 1040
Warning For connections outside the building where the equipment is installed, the
following ports must be connected through an approved network termination
unit with integral circuit protection: 10/100/1000 Ethernet. Statement 1044
User Guide for the Catalyst Express 520 Switches
3-4
Chapter 3 Installing the Switch
OL-12761-02