Troubleshoot Displaying Of The Device Manager; Device Manager Does Not Display - Cisco PIX 520 - PIX Firewall 520 User Manual

Chapter 7 Troubleshooting the Switch

Troubleshoot Displaying of the Device Manager

Device Manager Does Not Display

OL-12761-02
Here are some basic troubleshooting for problems related to displaying the device
manager.
Device Manager Does Not Display, page 7-3
•
Device Manager Is Not Operating Properly, page 7-4
•
Device Manager Has A Slow Response Time, page 7-4
•
Device Manager Is Not Accessible Through the Network, page 7-4
•
If you cannot display the device manager from your PC or laptop, make sure that
you entered the correct switch IP address in the browser.
If you entered the correct switch IP address in the browser, make sure that the
switch and your PC or laptop are in the same network or subnetwork. For
example:
If your switch IP address is 172.20.20.85 and your PC or laptop IP address is
•
172.20.20.84, both devices are in the same network.
If your switch IP address is 172.20.20.85 and your PC or laptop IP address is
•
10.0.0.2, the devices are in different networks and cannot directly
communicate without a router. You must either change the switch IP address
or change the PC or laptop IP address.
If the problem persists, follow the procedure in the
Mode" section on page
device manager Express Setup window.
If the problem still persists, follow the procedure in the
Software" section on page
Troubleshoot Displaying of the Device Manager
7-6, and then update the switch network settings on the
7-10.
User Guide for the Catalyst Express 520 Switches
"Access Direct Managed
"Recover the Switch
7-3