Regulatory Information; Year 2000 Compliance - Oki MB260 MFP Safety And Regulatory Information Manual

Regulatory Information

ENERGY STAR
As an ENERGY STAR Partner, Oki Data has
determined that this product meets the
ENERGY STAR guidelines for energy
efficiency.

Year 2000 Compliance

This product is Year 2000 Compliant. It contains
information technology that accurately processes date
and time data between the years 1999 and 2000, and
carries no issue for the September 9, 1999 (9999)
programming concern. This product, when used in
combination with products purchased from other
manufacturers, whose products properly exchange data
and time information, will accurately process the date and
time.
Federal Communications Commission
(FCC)
Declaration of Conformity
1. Product Identification
Product Name: MB260 MFP, MB280 MFP, MB290 MFP
Model No.: MB260 MFP, MB280 MFP, MB290 MFP
2. Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
3. Responsible Party
Oki Data Americas, Inc.
2000 Bishops Gate Boulevard
Mt. Laurel, NJ 08054-4620
1-800-654-3282 (1-800-OKI-DATA)
FCC Administrative Council for Terminal
Attachment Requirements for End Users
This device has been granted a registration number by
the Administrative Council for Terminal Attachment
(ACTA), under Part 68 and ACTA rules and regulations for
direct connection to the telephone lines. In order to
comply with these FCC rules, the following instructions
must be carefully read and applicable portions followed
completely.
1. This equipment complies with Part 68 of FCC rules and
the requirements adopted by the ACTA. On the back of
the equipment is a label that contains, among other
information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this inf
2. The following USOC jacks may be used with this
equipment: RJ11C.
3. A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements
®
5 - English
adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is
designed to be connected to a compatible modular jack
that is also compliant. See installation instructions for
details.
4. The REN is used to determine the quantity of devices
which may be connected to the telephone line.
Excessive RENs on the telephone line may result in the
devices not ringing in response to an incoming call. In
most, but not all areas, the sum of the RENs should not
exceed five (5.0). To be certain of the number of
devices that may be connected to the line, as
determined by the total RENs, contact the local
telephone company. For products approved after July
23, 2001, the REN for this product is part of the
product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are
the REN without a decimal point (e.g., 03 is a REN of
0.3). For earlier products, the REN is separately shown
on the label.
5. If the equipment, MB260 MFP, MB280 MFP, MB290
MFP, causes harm to the telephone network, the
telephone company will notify you in advance that
temporary discontinuance of service may be required.
But if advance notice isn't practical, the telephone
company will notify the customer as soon as possible.
Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
6. The telephone company may make changes in its
facilities, equipment, operations, or procedures that
could affect the operation of the equipment. If this
happens, the telephone company will provide advance
notice in order for you to make the necessary
modifications to maintain uninterrupted service.
7. If trouble is experienced with this equipment (MB260
MFP, MB280 MFP, MB290 MFP), please contact the
following for repair and/or warranty information:
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mount Laurel, N.J. 08054-4620
Telephone:(856) 235-2600 or
(800)-OKIDATA (800-654-3282)
If the equipment is causing harm to the telephone
network, the telephone company may request that you
disconnect the equipment until the problem is
resolved.
8. This equipment contains no user serviceable parts.
Please contact Oki Data for service.
9. This equipment cannot be used on public coin service
provided by the telephone company. Connection to
Party Line Service is subject to state tariffs. Contact
your state Public Utility Commission, Public Service
Commission, or Corporate Commission for information.
10.If your home has specially wired alarm equipment
connected to the telephone line, ensure the installation
of this MB260 MFP, MB280 MFP, MB290 MFP does not
disable your alarm equipment. If you have questions
about what will disable alarm equipment, consult your
telephone company or a qualified installer.