Calibrating The Iafc Settings - Yamaha CVP-309PE Owner's Manual

• NATURAL SOUND BOARD
This enhances the acoustic realism of the sound by recreating the reso-
nance characteristics of acoustic instruments. When used on a grand
piano sound, it produces a more natural-sounding piano. The sound of the
instrument itself is picked up by a microphone, and processed to create a
virtual soundboard.
• SPATIAL ENSEMBLE Effect
This lets you experience the ambience and reverberation that are charac-
teristic of performing on stage. Ambience and reverberation are also
added to the performance of the musicians playing together with you, let-
ting you enjoy the sensation of playing together on stage. The sound of the
instrument itself and the sound of singing and other instruments played
nearby is picked up by a microphone, and processed to simulate the spa-
tial characteristics of performing together on stage.
3
Press one of the [5 π
(sub-type).
4
Press the [8 π π † π † ] button to adjust the iAFC depth. †
π †

Calibrating the iAFC Settings

This automatically adjusts the sensitivity and response of iAFC so that the optimal
iAFC effect will be obtained. Make sure to execute this operation when you select
"NATURAL SOUND BOARD" or "SPATIAL ENSEMBLE."
1
Press the [F] (MIC CALIBRATION) button in the iAFC operation dis-
play (page 76) to call up the calibration display.
2
Press the [G] (CALIBRATION START) button to begin calibration.
When calibration begins, a fairly loud harpsichord note will sound four
times at a fixed interval. Calibration will end in approximately two and a
half minutes.
If the iAFC effect is slight or inaudible:
If it seems that iAFC is not effective when playing back Songs or Styles, turn
the iAFC feature off.
1 Press the [iAFC SETTING] button to call up the operation display.
2 Press the [1 †
† ] button to turn iAFC off.
† †
1
† ]–[7 π † ] buttons to select the iAFC setting
π † π π † † π † π π † †
2
1 2 3 4
Enhancing the Acoustic Realism of the Sound (iAFC)
5 6 7 8
Note on using calibration
While calibration is being per-
formed, do not make audible
noises in the vicinity of the
Clavinova. If any extraneous
sounds are made in the vicinity
of the Clavinova during calibra-
tion, the calibration may abort,
and the settings will reset to their
default values. If this occurs, you
should perform the calibration
once again.
CVP-309/307 Owner's Manual 77