Recalling The Registered Panel Setups - Yamaha CVP-309PE Owner's Manual

Recalling the Registered Panel Setups

Registration Memory data
compatibility
In general, Registration Memory
data (Bank files) is compatible
among the models CVP-309/
307/305/303/301. However, the
data may not be perfectly com-
patible, depending on the speci-
fications of each model.
About recalling setups from a
SmartMedia card or floppy
disk
When recalling the setups
including Song/Style file selec-
tion from a SmartMedia card or
floppy disk, make sure that the
appropriate SmartMedia card or
floppy disk including the regis-
tered Song/Style is inserted into
the card slot or floppy disk drive.
126 CVP-309/307 Owner's Manual
Saving the Registered Panel Setups
You can save all the eight registered panel setups as a single Registration Memory
Bank file.
1
Press the REGISTRATION MEMORY [REGIST. BANK] button to call up
the REGISTRATION BANK Selection Display.
2
Press the [6 † † ] button to save the Bank file (page 63).
†
†
1
Recalling the Registered Panel Setups
1
Press the REGISTRATION MEMORY [REGIST. BANK] button to call up
the REGISTRATION BANK Selection Display.
2
Press one of the [A]–[J] buttons to select a bank.
A
2
3
Press one of the green-lit numbered buttons ([1]–[8]) in the Registra-
tion Memory section.
Parameter Lock
You can "lock" specific parameters (e.g., effect, split point, etc.) to make them
selectable only via the panel controls—in other words, instead of via Registration
Memory, One Touch Setting, Music Finder, Song or incoming MIDI data, etc.
Call up the Parameter Lock display ([FUNCTION] → [I] UTILITY → TAB [ √ ]
CONFIG 1 → [B] 3 PARAMETER LOCK). Select the desired parameter by
using the [1 π† ]–[7 π† ] buttons, then lock it with the [8 π ] (OK) button.
Bank 4
Bank 3
Bank 2
Bank 1
1 2 3 4 5 6
2
7 8
1 2
3