Yamaha CVP-309PE Owner's Manual page 112

Style Creator
When recording channels BASS-
PHR2 based on an internal Style,
delete the original data before
recording. Overdub recording is
not possible on channels BASS-
PHR2 (see above).
When the channel indication at
the lower part of the display dis-
appears, you can press the [F]
(REC CH) button to re-display it.
112 CVP-309/307 Owner's Manual
Realtime Recording (BASIC)
Create a single Style by recording the individual channels one-by-one, using real-
time recording.
Realtime Recording Characteristics
• Loop Recording
Style playback repeats the rhythm patterns of several measures in a "loop," and
Style recording is also done using loops. For example, if you start recording with
a two-measure main section, the two measures are repeatedly recorded. Notes
that you record will play back from the next repetition (loop), letting you record
while hearing previously recorded material.
• Overdub Recording
This method records new material to a channel already containing recorded
data, without deleting the original data. In Style recording, the recorded data is
not deleted, except when using functions such as Rhythm Clear (page 114) and
Delete (page 113). For example, if you start recording with a two-measure MAIN
section, the two measures are repeated many times. Notes that you record will
play back from the next repetition, letting you overdub new material to the loop
while hearing previously recorded material.
When creating a Style based on an existing internal Style, overdub recording is
applied only to the rhythm channels. For all other channels (except rhythm),
delete the original data before recording.
When using realtime recording based on the internal Styles:
Overdub recording possible.
1
Select the desired Style to serve as the basis for recording/editing
(page 45).
When creating a new Style from scratch, press the [C] (NEW STYLE) button
from the display shown in step 5 below.
2
Press the [DIGITAL RECORDING] button.
3
Press the [B] button to call up the Style Creator display.
4
Use the TAB [ √ ][ ® ] buttons to select the BASIC tab.
5
Specify the channel to be recorded by simultaneously holding down
the [F] (REC CH) button and pressing the appropriate numbered but-
ton, [1 † † ]–[8 † † ].
† †
† †
Overdub recording not possible.
Delete the data before recording.