Yamaha CVP-309PE Owner's Manual page 202

The file/folder copied or cut from one media (such as
a SmartMedia card, etc.) cannot be directly copied or
pasted to another media.
• This is normal. Since directly copying data is not possi-
ble, copy or paste the data once to the User display, then
copy or paste it again to the Card/USB display after
changing the media.
Demo
How can I stop the demo?
• Press the [EXIT] button.
Help
How can I leave the Help feature?
• Press the [EXIT] button.
Voice
The Voice selected from the Voice Selection display
does not sound.
• Check whether or not the selected part is turned on
(page 73).
• To select the Voice for the right-hand key range, press the
PART SELECT [RIGHT 1] button. For the Voice to be lay-
ered in the right-hand range, press the PART SELECT
[RIGHT 2] button. To select the Voice for the left-hand
key range, press the PART SELECT [LEFT] button.
A strange "flanging" or "doubling" sound occurs. The
sound is slightly different each time the keys are
played.
• The RIGHT 1 and RIGHT 2 parts are set to "ON," and
both parts are set to play the same Voice. Turn off the
RIGHT 2 part or change the Voice of one of the parts.
The sound seems strange or different than expected
when changing a rhythm Voice (drum kit, etc.) of the
Style or Song from the Mixer.
• When changing the rhythm/percussion Voices (drum
kits, etc.) of the Style and Song from the VOICE parame-
ter, the detailed settings related to the drum voice are
reset, and in some cases you may be unable to restore
the original sound. In the case of Song playback, you
can restore the original sound by returning to the begin-
ning of the Song and playing back from that point. In the
case of Style play, you can restore the original sound by
selecting the same Style again.
Tremolo/Trill cannot be applied to the Organ Flute
Voice.
• This is normal; Tremolo and Trill settings in the Har-
mony/Echo display are not effective for Organ Flute
Voices.
202 CVP-309/307 Owner's Manual
The Harmony function does not operate.
• Harmony cannot be used with the Full Keyboard or AI
Full Keyboard fingering modes. Select an appropriate
fingering mode (page 101).
When a Voice is changed, the previously selected
effect is changed.
• Each Voice has its own suitable preset settings, which are
automatically recalled when the corresponding Voice
Set parameters are turned on (page 100).
The Voice produces excessive noise.
• Certain Voices may produce noise, depending on the
Harmonic Content and/or Brightness settings in the FIL-
TER page of the Mixing Console display (page 84).
The sound is distorted or noisy.
• The volume may be turned up too high. Make sure all
relevant volume settings are appropriate.
• This may be caused by certain effects. Try canceling all
unnecessary effects, especially distortion-type effects
(page 86).
• Some filter resonance settings in the Sound Creator dis-
play (page 95) can result in distorted sound. Adjust these
settings if necessary.
• Noise may occur depending on the settings made in the
Filter display of the Mixing Console. Adjust the Har-
monic Content or Brightness controls in the Filter display
(page 84).
The sound does not change when replacing Voices
with the Song Auto Revoice feature.
• Depending on the particular Song data, there are some
instances where Song Auto Revoice has no effect, even
when replacing Voices.
The sound of the Voice doesn't change, even when
editing the Voice.
• Keep in mind that adjustments made to the parameters
may not make much change in the actual sound depend-
ing on the original settings of the Voice.
Voices other than those in the Preset display cannot
be selected for Step recording.
• This is normal.
iAFC
Calibration is aborted.
• (CVP-309 grand piano type)
If you close the lid completely or to the shorter stay
while performing the calibration, the calibration will be
aborted. Perform the calibration once again after open-
ing the lid with the longer stay.
• The speaker is turned off. Perform the calibration once
again after turning the speaker on (page 17).
• If any low-range noise (such as an air conditioner or traf-
fic) is audible around the Clavinova during the calibra-
tion, the calibration may abort and the settings may be
reset to their default values. Perform the calibration once
again after eliminating the noise.