Yamaha CVP-309PE Owner's Manual page 211

9
Set the adjuster.
Rotate the adjuster until it
comes in firm contact with
the floor surface.
10
(CVP-309)
Connect the USB cable of floppy disk drive to
[USB TO DEVICE] terminal.
■ After completing the assembly, please check
the following.
• Are there any parts left over?
→ Review the assembly procedure and correct any
errors.
• Is the Clavinova clear of doors and other movable
fixtures?
→ Move the Clavinova to an appropriate location.
• Does the Clavinova make a rattling noise when you
shake it?
→ Tighten all screws.
• Does the pedal box rattle or give way when you
step on the pedals?
→ Turn the adjuster so that it is set firmly against the
floor.
• Are the pedal and power cords inserted securely
into the sockets?
→ Check the connection.
• If the main unit creaks or is otherwise unsteady
when you play on the keyboard, refer to the assem-
bly diagrams and retighten all screws.
When moving the instrument after assembly, always
hold the bottom of the main unit.
CAUTION
Do not hold the key cover or top portion. Improper han-
dling can result in damage to the instrument or personal
injury.
Key cover
Do not hold here.
Hold here.
CVP-309/307 Owner's Manual
Top portion
Do not
hold here.
211