Play Back The Recorded Performance; Deleting Recorded Performance Data (Midi Recording) - Yamaha 440 Owner's Manual

5.
Stop recording.
Press either the [STOP] or [REC] button to stop recording.
When recording is stopped, dashes appear in the display in succession to
indicate that the recorded data is being saved. After the data is saved, "End"
will appear on the display and the Song number will appear. Finally, the
recorded part's lamp will light in green to indicate that the current Song
now contains data. (Record mode is disengaged automatically.)
NOTICE
Do not turn off the power of the instrument when dashes appear in the display in succession. Doing so
may delete all Song data in the instrument, including external Songs (page 29).
6.

Play back the recorded performance.

Press the [PLAY/PAUSE] button to play back the recorded performance.
To stop playback, press the [STOP] button.
Record another part in the same way and complete your Song.

Deleting recorded performance data (MIDI recording)

This section explains how to delete the right and left parts of a User Song separately. If you wish to delete
both parts, do the following operation on each part. As for Song data saved to a USB storage device, both
parts can be deleted at once by following the instructions on page 43.
1.
Select a User Song to delete.
Refer to steps 1 to 2 in "Quickly recording a performance without
specifying a part" (page 34).
2.
Call up the Record mode.
Press the [REC] button to call up the Record mode.
3.
Select a part to delete.
Press the [RIGHT] or [LEFT] button so that the lamp of the part you wish
to delete flashes in red.
4.
Delete the selected part.
Press the [PLAY/PAUSE] button to start recording, then press the [STOP]
button without playing the keyboard. All data previously recorded for the
selected part will be deleted and the lamp will be turned off.
Delete another part in the same way as desired.
NOTE
If you wish to delete an audio
Song recorded to a USB storage
device, refer to page 43.
NOTE
Deleting both parts restores the
metronome beat and tempo to the
default setting. If you wish to re-
record after deleting both parts,
you need to reset the beat and
tempo.
Advanced Functions
Recording Your Performance
37