Table of Contents
Advertisement
OWNER'S MANUAL
IMPORTANT
— Check your power supply —
Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a
voltage selector may be provided on the rear panel of the main keyboard unit near the power cord. Make sure that the voltage
selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To change the setting
use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel.
For information on assembling the instrument, refer to the instructions at the end of this manual.
C L P - 4 7 0
C L P - 4 4 0
C L P - 4 3 0
C L P - S 4 0 8
C L P - S 4 0 6
C L P - 4 6 5 G P
EN
Advertisement
Table of Contents
Related Manuals for Yamaha Clavinova CLP-430
Summary of Contents for Yamaha Clavinova CLP-430
- Page 1 OWNER’S MANUAL C L P - 4 7 0 C L P - 4 4 0 C L P - 4 3 0 C L P - S 4 0 8 C L P - S 4 0 6 C L P - 4 6 5 G P IMPORTANT —...
-
Page 2: Special Message Section
DO NOT modify this unit or commission permanent record of your purchase. others to do so unless specifically authorized by Yamaha. Product performance and/or safety standards may be diminished. Claims filed under the expressed warranty may be denied if the unit is/has been modified. - Page 3 Compliance with FCC regulations * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B) COMPLIANCE INFORMATION STATEMENT IMPORTANT NOTICE FOR THE UNITED KINGDOM...
-
Page 4: Precautions
Then have the device inspected by Yamaha service where anyone could walk on, trip over, or roll anything over it. - Page 5 • If the bench screws become loose due to extensive long-term use, tighten them periodically using the included tool. Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
-
Page 6: Notice
• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. -
Page 7: Included Accessories
Thank you for purchasing the Yamaha Clavinova! We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the Clavinova. We also recommend that you keep this manual in a safe and handy place for future reference. -
Page 8: Main Features
These effects capture the true essence of an acoustic grand piano to help you create and perform with luscious piano-like expression. Highly evolved touch and expression: Graded Hammer 3 (GH3) keyboard (CLP-430/ 465GP) and Graded Hammer 3 (GH3) keyboard with synthetic ivory keytops (CLP-... -
Page 9: Table Of Contents
Table of Contents PRECAUTIONS ............4 Deleting recorded performance data (MIDI recording)... 37 Changing the initial settings such as Voice and Tempo after NOTICE ................6 recording (MIDI recording)..........38 Included Accessories ............7 Handling Song Files ........... 40 About the Manuals ............7 Convert a MIDI Song to an Audio Song during Main Features ...............8 playback ................... -
Page 10: Introduction
Introduction Panel Controls The panel illustrations shown are taken from the CLP-470. A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 ] Power switch ..........page 15 Display............. - Page 11 (CLP-470/440/S408/S406) F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7 CLP-470/440/430 CLP-S408/S406 (CLP-470/440) Music rest Music rest Music braces (page 13) Key cover (page 13) (page 14) (page 12)
-
Page 12: Getting Started - Playing The Clavinova As A Piano
Getting Started — Playing the Clavinova as a Piano With the full set of pedals and expressive keyboard, this instrument can be played just like a real acoustic piano. This section shows you how to simply set up the instrument and play it. It also shows you how to use the built-in metronome, convenient for practice purposes. -
Page 13: Music Rest
Music Rest S408 S406 465GP To raise the music rest: Pull the music rest up and toward yourself as far as it will go. Flip down the two metal supports at the left and right on the rear of the music rest. Lower the music rest so that it rests on the metal supports. -
Page 14: Music Braces
Music Braces S408 S406 465GP These braces are for holding the pages of music books in place. To open To close S408 S406 465GP CAUTION • Make sure that the end of the stay fits securely in the lid recess. If the stay is not properly seated in the recess, the lid may fall, causing damage or injury. -
Page 15: Turning The Power On
Use only the AC power cord supplied with your instrument. If the supplied cord is lost or damaged and needs to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard! The type of AC power cord provided with your instrument may be different depending on the country in which it is purchased. -
Page 16: Setting The Volume - [Master Volume]
Setting the volume — [MASTER VOLUME] To adjust the volume, use the [MASTER VOLUME] slider located at the left of the panel. Play the keyboard to actually produce sound while you adjust the volume. Decreases the Increases the level. level. MASTER VOLUME: The volume level of the entire keyboard sound. -
Page 17: Using Headphones
Do not use headphones at a high volume for an extended period of time. Doing so may phone plug cause hearing loss. Optional headphones HPE-160 Yamaha headphones. Using the headphone hanger You can hang the headphones on the instrument. Install the headphone hanger using included two screws (4 x 10mm) as shown in the illustration. -
Page 18: Using The Pedals
Using the pedals The Clavinova has three foot pedals: damper pedal (right), sostenuto pedal (center), and soft pedal (left) that produce a range of expressive effects similar to those produced by the pedals on an acoustic piano. Damper (Right) Pedal When this pedal is pressed, the sound is sustained, even when the keys are released. -
Page 19: Adjusting The Touch Sensitivity - [Touch]
Adjusting the touch sensitivity — [TOUCH] [−/NO][+/YES] [TOUCH] You can select four different types of keyboard touch sensitivity by pressing the [TOUCH] button. Select one to match different playing styles and preferences. NOTE HARD ... Requires that the keys be played quite hard to produce maximum This setting does not change the weight of the keyboard. -
Page 20: Using The Metronome - [Metronome]
Using the metronome — [METRONOME] This instrument features a built-in metronome (a device that keeps an accurate tempo) that is convenient for practicing. [−/NO][+/YES] [TEMPO/FUNCTION ] NOTE Start the metronome. The volume of the metronome can be adjusted in the Function mode The metronome sound is turned on by pressing the (page 51). -
Page 21: Maintenance
To keep your Clavinova in optimum condition, we recommend that Maintenance you periodically follow the maintenance points below. Instrument and Bench Maintenance • When cleaning the instrument, use a soft, dry or slightly damp cloth. NOTICE Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths. If you are using a model with a polished finish, gently remove dust and dirt with a soft cloth. -
Page 22: Advanced Functions
PIPE ORGAN1 BWV.601 PIPE ORGAN2 Triosonate Nr.6, BWV.530 — The demonstration Songs listed above are short rearranged excerpts of the original compositions. All other Songs are Yamaha originals (© 2011 Yamaha Corporation). Advanced Functions Playing various musical instrument sounds (Voices) - Page 23 Mode: Press the [DEMO] button to call up the Demo mode. A mode is a status under which you can execute a certain The Voice button indicators will flash in sequence. function. In the Demo mode, you can play back demonstration Songs.
-
Page 24: Enhancing And Customizing The Sound - [Brilliance]/ [Reverb]/[Effect]
Enhancing and customizing the sound — [BRILLIANCE]/ [REVERB]/[EFFECT] [−/NO] [+/YES] [REVERB] [BRILLIANCE] [EFFECT] [BRILLIANCE] Default setting: NORMAL This control can be used to change the tonality or “timbre” of the sound output. NOTE When the BRILLIANCE is set to Press the [BRILLIANCE] button a few times until the indicator corresponding to BRIGHT, the overall sound will be slightly louder. -
Page 25: Transposition - [Transpose]
[EFFECT] Default setting: The default effect type (including The button allows you to select an effect to enhance the sound and give it greater Off) and depth settings are different for each Voice. depth and animation. Press the [EFFECT] button a few times until the indicator corresponding to the desired type lights. -
Page 26: Layering Two Voices (Dual Mode)
Turning transpose on or off NOTE Each time you press the [TRANSPOSE] button, transpose turns on or off. When Audio Song playback cannot be transposed. the lamp is flashing, the function is on. When it is off or the transposition amount is 0, the lamp does not flash. -
Page 27: Splitting The Keyboard Range And Playing Two Different Voices (Split Mode)
Splitting the keyboard range and playing two different Voices (Split mode) S408 S406 465GP Split mode enables you to play two different Voices on the keyboard — one with the left hand and another with the right hand. For example, you can play a bass part using the Wood Bass or Electric Bass Voice with the left hand, and a melody with the right hand. - Page 28 The name of the current split-point key appears on the display while the [SPLIT] button is held. Example of split-point key display High bar indicates sharp note Low bar indicates flat note NOTE Select a Voice for the right hand. [VARIATION] in Split Mode Press a Voice button.
-
Page 29: Playing Back Songs
“MIDI Basics” MIDI Songs and Audio Songs. (downloadable from the Yamaha A MIDI Song is comprised of your keyboard performance information and is not a website). recording of the actual sound itself. The performance information refers to which keys are played, at what timing, and at what strength—just as in a musical score. -
Page 30: Playing Back Songs
Songs recorded in this instrument are saved as SMF Format 0. • ESEQ This format is compatible with many of Yamaha’s MIDI devices, including the Clavinova series instruments. This is a common format used with various Yamaha software. Among ESEQ files, Disklavier Piano Soft Songs can be played back on this instrument. - Page 31 Start playback. NOTE • The metronome can be used Press the [PLAY/PAUSE] button to start playback. during playback. The metronome will automatically After playback starts, the measure number (in the case of MIDI Songs) stop when playback is stopped. which is being played or playing time (in the case of Audio Songs) is shown •...
-
Page 32: Useful Playback Functions
Useful playback functions Playing a one-hand part – Part Cancel function (MIDI Songs) You can practice the left hand part by playing back only the RIGHT part while you can practice the right hand part by playing back only the LEFT part. Refer to page 32 for instructions. -
Page 33: A-B Repeat Function (Midi Songs)
Start playback. NOTE Press the [PLAY/PAUSE] button to start playback. • The parts can be turned on or off even during playback. Play and practice the part you just turned off while listening to the • Both parts are automatically playback part as a guide. -
Page 34: Recording Your Performance
Recording Your Performance This instrument allows you to record your performance in the following two methods. • MIDI recording With this method, recorded performances are saved to the instrument or a USB storage device as an SMF (format 0) MIDI Song. Since you can record up to two parts separately, you could record the left-and right-hand parts independently, or record both parts of a duet and hear how they sound when played back. -
Page 35: Start Recording
Select a Song number for the data. Part button indications Select a Song number by using the [-/NO] [+/YES] buttons. Off: Contains no data On (green): Contains data • USER MIDI ....U.01-U.10 Flashing (red): Part is enabled for recording • USB MIDI ......U.00-U.99 •... -
Page 36: Stop Recording
Stop recording. Press either the [STOP] or [REC] button to stop recording. When recording is stopped, dashes appear in the display in succession to indicate that the recorded data is being saved. After the data is saved, “End” will appear on the display and the Song number will appear. Finally, the recorded part’s lamp will light in green to indicate that the current Song now contains data. -
Page 37: Deleting Recorded Performance Data (Midi Recording)
Stop recording. Press either the [STOP] or [REC] button to stop recording. When recording is stopped, dashes appear in the display in succession to indicate that the recorded data is being saved. After the data is saved, “End” will appear on the display and the Song number will appear. Finally, the recorded part’s lamp will light in green to indicate that the current Song now contains data. -
Page 38: Changing The Initial Settings Such As Voice And Tempo After Recording (Midi Recording)
Changing the initial settings such as Voice and Tempo after recording (MIDI recording) With MIDI recording, you can change the setting of the performance data, even after recording. For example, you can change the Voice to create a different ambience or adjust the Song tempo to your preferences. - Page 39 Save the changed settings. Simultaneously hold down the [REC] button and press the [STOP] button. Dashes appear in the display in succession to indicate that the changed settings are being saved. After the data is saved, “End” will appear on the display and the Song number will appear.
-
Page 40: Handling Song Files
Handling Song Files In the File mode, you can perform various operations and manage Song files saved to a connected USB storage device. Before connecting a USB storage device, refer to “Connecting a USB storage device” (page 47). NOTE Function Page Before handling Songs with a USB storage device, make sure... -
Page 41: Convert A Midi Song To An Audio Song During Playback
Convert a MIDI Song to an Audio Song during playback 2 3 5 Select a MIDI Song. Press the [SONG SELECT] button so that the USER MIDI or USB MIDI lamp lights, then use the [-/NO]/[+/YES] buttons to select the desired MIDI Song to be converted. -
Page 42: Copying User Songs In The Instrument To A Usb Storage Device
Copying User Songs in the instrument to a USB storage device 2 3 5 Select a User Song. Press the [SONG SELECT] button so that the USER MIDI lamp lights, then use the [-/NO]/[+/YES] buttons to select the User Song to be copied. Call up the File mode. -
Page 43: Deleting A Song File In The Usb Storage Device
Deleting a Song file in the USB storage device 2 3 5 Select the drive which contains the Song file you wish to NOTE Confirm the Song to be deleted delete. before going to step 2, since the Song cannot be played back in Press the [SONG SELECT] button several times to turn on the USB the File mode. -
Page 44: Formatting The Usb Storage Device
Formatting the USB storage device NOTICE When formatting is done, all data stored in the USB storage device are deleted. Save important data to a computer or another storage device. Call up the File mode. Press the [FILE] button so that the DEL./FORMAT lamp lights, hold the [FILE] button, then simultaneously press the [-/NO] and [+/YES] buttons to call up “For. -
Page 45: Connections
Connections Connectors CAUTION Before connecting the Clavinova to other electronic components, turn off the power to all the components. Before turning the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may result. Refer to the “Panel Controls”... - Page 46 NOTICE When the Clavinova’s AUX OUT jacks are connected to an external audio system, first turn on the power to the Clavinova, then to the external audio system. Reverse this order when you turn the power off. NOTE Clavinova Powered speaker Use cables and plugs with no AUX OUT resistance.
-
Page 47: Connecting A Usb Storage Device
When a USB storage device is connected or media is The instrument does not necessarily support all inserted, a message may appear prompting you to format commercially available USB devices. Yamaha cannot the device/media. If so, execute the Format operation (page guarantee operation of USB devices that you purchase. -
Page 48: Connecting To A Computer
MIDI driver from the following URL then install it to your computer. For instructions on installation, refer to the Install Guide included in the package file. http://music.yamaha.com/download/ For details about OS for Yamaha Standard USB-MIDI driver, visit the URL above. Advanced Functions Connections... - Page 49 SMF format 0 or format 1. Musicsoft Downloader is a free download from the Yamaha website at the following URL. To be able to use this function, you must first download Musicsoft Downloader from the website.
-
Page 50: Connecting External Midi Devices
Implementation Chart” to find out what MIDI data and commands your devices can Clavinova transmit or receive. Refer to the MIDI Implementation Chart in the Data Format on the Yamaha website MIDI IN MIDI OUT MIDI IN MIDI OUT MIDI reception... -
Page 51: Function Parameters - Various Convenient Settings
To get the most out of your Clavinova, set some of the various convenient parameters here, such as fine tuning the pitch, adjusting the metronome volume, etc. For the default values, see page 67. Function Parameter List Function Number Reference Function page CLP-470/440/S408/S406 CLP-430/465GP Fine Tuning of the Pitch Selecting a Scale Scale F2.1 F2.1 Base Note F2.2 F2.2... -
Page 52: Function Mode - Basic Operation
Function Number Reference Function page CLP-470/440/S408/S406 CLP-430/465GP Backup Functions Voice F8.1 F7.1 MIDI F8.2 F7.2 Tuning F8.3 F7.3 Others F8.4 F7.4 Character Code F8.5 F7.5 Data Backup Save F8.6 F7.6 Load F8.7 F7.7 Function mode — basic operation NOTE Call up the Function mode. -
Page 53: Function Parameters - Details
Function parameters — details • Werckmeister/Kirnberger Fine tuning of the pitch These scales combine Mean Tone and Pythagorean in different ways. With these scales, modulation changes the impression and feel of the songs. They were often You can fine tune the pitch of the entire instrument. This used in the era of Bach and Beethoven. -
Page 54: Dual Balance
Voice 1 Octave Shift Dual Mode Functions You can set various parameters for the Dual mode to Voice 2 Octave Shift optimize the settings for the songs you play, such as adjusting the volume balance between two Voices. Dual mode function settings are set individually for each Voice Shifts the pitch up and down in octave steps for Voice 1 combination. -
Page 55: Split Point
Right Voice Octave Shift Split Mode Functions S408 S406 465GP Left Voice Octave Shift This menu enables you to make various detailed settings for the Split mode. By changing the split point or other settings, you can optimize the settings for the songs you Shifts the pitch up and down in octave steps for the Right play. -
Page 56: String Resonance Depth
String Resonance Depth Pedal Settings and Acoustic Processing S408 S406 465GP These functions allow you to assign the [PLAY/PAUSE] Sets the way the string resonance effect is applied to the function to the pedal or set the depth, etc. of the GRAND PIANO 1 –... -
Page 57: Metronome Volume
NOTE Volume Setting Song data is not transmitted via the MIDI connections. However, channels 3 – 16 of non-protected songs will be transmitted via the MIDI connections depending on the MIDI Song Channel Selection setting Determines the volume of the metronome or Audio Song (page 56). -
Page 58: Initial Setup Send
• (CLP-470/440/S408/S406) Split Balance The instrument also transmits MIDI control change • Damper Resonance Depth (CLP-470/440/S408/S406)/ information when the pedal or other appropriate (CLP-430/465GP) controls are operated. • Soft Pedal Effect Depth (CLP-470/440/S408/S406)/ This function makes it possible to cancel control change... - Page 59 Backup contents • Touch Sensitivity (including the FIXED volume) • Pedal settings and acoustic processing – • Metronome (Beat, Volume < (CLP-470/440/S408/S406)/ (CLP-470/440/S408/S406)/ (CLP-430/ (CLP-430/465GP) settings>) 465GP) • Damper Resonance Depth ( <CLP-470/440/S408/S406>/ • MIDI song playback channel (CLP-470/440/S408/S406)/ <CLP-430/465GP>) (CLP-430/465GP) •...
-
Page 60: Data Backup
S406 465GP Backup data (main settings and Songs in the USER MIDI drive) are stored to a USB memory device. Backup file names CLP-470: clp-470.bup CLP-440: clp-440.bup CLP-430: clp-430.bup CLP-S408: clp-s408.bup CLP-S406: clp-s406.bup CLP-465GP: clp-465gp.bup Detailed Settings Function Parameters — Various Convenient Settings... -
Page 61: Restoring The Default (Factory-Programmed) Settings
Restoring the default (factory-programmed) settings While holding the C7 key (right-most key on the keyboard), press the power switch to turn the power on. This operation erases backup data in this instrument (including backup settings in the Function mode) and restores the factory default settings. -
Page 62: Appendix
( page 44 ) and connect to the instrument again. A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized distributor. Displayed when the current operation is completed. -
Page 63: Troubleshooting
Troubleshooting When a message is displayed, refer to the “Message List” (page 62) for troubleshooting aid. Problem Possible Cause and Solution The instrument does not turn on. The instrument has not been plugged in properly. Securely insert the female plug into the socket on the instrument, and the male plug into a proper AC outlet (page 15). -
Page 64: Preset Voice List
Preset Voice List : Yes CLP-470/440/S408/S406 —: No Touch Stereo Key-Off Sustain String Voice Name Voice description Response Sampling Sampling Sampling Resonance This sound was sampled from a concert grand piano. It uses different samples depending on the strength of your playing and produces smoother tonal changes. -
Page 65: String Resonance
Touch Stereo Key-Off Sustain String Voice Name Voice description Response Sampling Sampling Sampling Resonance Vibraphone played with relatively soft mallets. The tone VIBES/GUITAR — — — becomes more metallic the harder you play. Warm and natural-sounding nylon guitar. Enjoy the quiet ... - Page 66 : Yes CLP-430/465GP —: No Voice Name Touch Response Stereo Sampling Key-Off Sampling Voice description This sound was sampled from a concert grand piano. It uses different samples depending on the strength of your playing and GRAND PIANO1 —...
-
Page 67: Default Setting List
Default Setting List Backup Group Function Default CLP-470/440/ CLP-430/465GP S408/S406 Touch Sensitivity MEDIUM F8.1 F7.1 Volume in the FIXED Mode Metronome — — Metronome Time Signature 0 (no accent) F8.1 F7.1 Tempo — — Voice GRAND PIANO 1 F7.1 Variation (CLP-470/440/S408/S406) —... - Page 68 Function Number Backup Group CLP-470/ CLP-470/ Function Default CLP-430/ CLP-430/ 440/S408/ 440/S408/ 465GP 465GP S406 S406 F5.1 F4.1 Pedal [PLAY/PAUSE] Function F8.4 F7.4 F5.2 F4.2 Half Pedal Point F5.3 F4.3 Damper Resonance Depth Preset for each Voice F8.1 F7.1 F5.4 F4.4...
-
Page 69: Assembling The Clavinova
Assembling the Clavinova Assembly Precautions S408 S406 465GP CAUTION • Assemble the unit on a hard and flat floor with ample space. Do not hold here CAUTION • Be careful not to confuse parts, and be sure to install all parts in When moving the instrument the correct orientation. -
Page 70: Clp-470 Assembly
CLP-470 Assembly Remove all parts from the package and make sure you have all of the items. Assembly parts 6 x 20 mm long screws x 4 6 x 16 mm short screws x 6 Foamed styrol pads Remove foamed styrol pads from the package, position them on the floor, then place A on top of them. - Page 71 Attach C to D and E. Mount A. Untie and straighten out the bundled pedal Make sure that you mount the main unit by cord. holding the front bottom in areas that are at Do not discard the vinyl tie. You will need it least 15 cm towards the center from either end later in step 5.
-
Page 72: Connect The Power Cord
Insert the plug of the power cord into the power Connect the pedal cord. connector. Insert the plug of the pedal cord into the pedal Set the adjuster. connector. Rotate the adjuster until the pedal box comes in Attach the cord holders to the rear panel as firm contact with the floor surface. -
Page 73: Clp-440/430 Assembly
CLP-440/430 Assembly Remove all parts from the package and make sure you have all of the items. *This illustration shows model CLP-440. Assembly parts 6 x 20 mm long screws x 4 6 x 16 mm short screws x 6 Foamed styrol pads Remove foamed styrol pads from the package, position them on the floor, then place A on top of them. - Page 74 Attach C to D and E. Mount A. Be sure to place your hands at least 15 cm from Untie and straighten out the bundled pedal cord. either end of the main unit when positioning it. Do not discard the vinyl tie. You will need it later in step 5.
- Page 75 Connect the pedal cord. Insert the plug of the power cord into the power connector. Insert the plug of the pedal cord into the pedal connector. Set the adjuster. Attach the cord holders to the rear panel as Rotate the adjuster until the pedal box comes in shown, then clip the cord into the holders.
-
Page 76: Clp-S408 Assembly
CLP-S408 Assembly Remove all parts from the package and make sure you have all of the items. Assembly parts 6 x 20 mm long screws x 10 Protective sheet Connector 6 x 16 mm short screws x 6 panel Foamed styrol pads Remove foamed styrol pads from the package, position them on the floor, then place A on top of them. - Page 77 Attach D to E and F. Temporarily secure B by finger-tightening four long screws (6 x 20mm). Attach D to E and F by using four long screws * Insert four screws into the larger holes (all four holes) on the brackets.
- Page 78 Secure A. Connect the pedal cord. Secure A from the rear using two short screws Insert the pedal cord plug into the [PEDAL] (6 x 16 mm). connector. Secure A from the rear using two thin screws Attach the cord holders to the instrument as (4 x 14 mm).
- Page 79 Connect the power cord. Attach the headphone hanger. Use the included two screws (4 x 10 mm) to For models that feature a voltage selector: Set attach the hanger as shown in the illustration. the voltage selector to an appropriate voltage. Voltage Selector Before connecting the AC power cord, check the setting of the voltage selector which is provided in some areas.
-
Page 80: Clp-S406 Assembly
CLP-S406 Assembly Remove all parts from the package and make sure you have all of the items. Assembly parts Protective sheet 6 x 25 mm long screws x 6 Connector 4 x 16 mm thin screws x 11 panel Foamed styrol pads Remove foamed styrol pads from the package, position them on 6 x 16 mm short screws x 6 the floor, then place A on top of them. - Page 81 Attach D to E and F. Mount C. Attach D to E and F by using four long screws Attach the C from the front. (6 x 25 mm). 3-1-1 Remove the twist tie from the folded pedal cord. 3-1-2 Secure upper end of C using two long screws (6 x 25 mm) from the rear.
- Page 82 Attach A. Connect the pedal cord. Adjust the position of A so that the left and Insert the pedal cord plug into the [PEDAL] right ends of A will project beyond E and F connector. equally (as seen from the rear). Attach the cord holders to the instrument as shown, then clip the cord into the holders.
- Page 83 Connect the power cord. Attach the headphone hanger. Use the included two screws (4 x 10 mm) to For models that feature a voltage selector: Set attach the hanger as shown in the illustration. the voltage selector to an appropriate voltage. Voltage Selector Before connecting the AC power cord, check the setting of the voltage selector which is provided in some areas.
-
Page 84: Clp-465Gp Assembly
CLP-465GP Assembly Remove all parts from the package and make sure you have all of the items. Main unit Assembly parts Headphone hanger 6 × 40 mm fixing screws × 12 4 x 10 mm thin screws x 2 Headphone hanger 6 ×... - Page 85 Attach two front legs and a rear leg. Insert the pedal cord plug into the pedal connector. Insert the plug so the arrow side Refer to the diagram below to verify the faces front (toward the keyboard). orientation of the legs. If the plug will not go in easily, do not force it.
- Page 86 Connect the power cord. Attach the headphone hanger. Use the included two screws (4 x 10 mm) to For models that feature a voltage selector: attach the hanger as shown in the illustration. Set the voltage selector to an appropriate voltage.
-
Page 87: Specifications
Specifications CLP-470 CLP-440 CLP-430 CLP-S408 CLP-S406 CLP-465GP Size/Weight Width 1420mm (55-7/16") [1449mm 1407mm [1429mm [For models with polished finish] [1424mm] (56-1/16") (57-1/16")] (55-3/8") (56-1/4")] Height 907mm (35-11/16") [977mm 975mm [930mm [For models with polished finish] [909mm (35-13/16")] (38-7/16")] (38-3/8") (36-5/8")]... - Page 88 (included or optional depending on locale), My Yamaha Product User Registration * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.
-
Page 89: Index
Index Intelligent Acoustic Control ..........16 A-B Repeat ................33 Accessories ................7 Key Cover ................12 Adjusting the tempo (MIDI Songs) ........31 Key-off Sample ..............56 Assembly ................69 Audio conversion ..............41 Audio Recording ...............34 Lid ..................14 Audio Song .................29 Maintenance ..............21 Backup (Save/Load) ............60 Message ................ - Page 90 USB Storage Device ............47 User Song ................29 VARIATION ..............22 Voice ..................22 Voice Demo ................22 Voices (Dual) ..............26 Volume ................16 Volume (Audio playback) ..........57 Volume (Dual) ..............54 Volume (Metronome) ............57 Volume (Split) ..............55 Appendix Index...
- Page 91 Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC.
-
Page 92: Important Safety Instructions
Explanation of Graphical Symbols The lightning flash with arrowhead symbol C AUTI ON within an equilateral triangle is intended to alert the user to the presence of uninsulated RISK OF ELECTRIC SHOCK “dangerous voltage” within the product’s DO NOT OPEN enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 93 Important Notice: Guarantee Information for customers in European Economic Area (EEA) and Switzerland...
- Page 94 Yamaha Representative Offices in Europe AUSTRIA GREECE NETHERLANDS BELGIUM HUNGARY NORWAY ICELAND BULGARIA POLAND CYPRUS PORTUGAL CZECH REPUBLIC IRELAND (REPUBLIC OF IRELAND) ROMANIA DENMARK ITALY SLOVAKIA ESTONIA LATVIA SLOVENIA FINLAND LIECHTENSTEIN SPAIN LITHUANIA SWEDEN FRANCE LUXEMBOURG SWITZERLAND GERMANY MALTA UNITED KINGDOM...
- Page 95 Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo.
- Page 96 Yamaha Global Home http://www.yamaha.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Digital Musical Instruments Division © 2011 Yamaha Corporation WZ37930 106MWGR*.*-**E0...