Volume Setting; Midi Receive Channel; Metronome Volume; Midi Functions - Yamaha 440 Owner's Manual

Volume Setting

Determines the volume of the metronome or Audio Song
playback.

Metronome Volume

470 440
470 440
Setting range: 1 – 20
Default setting: 15
SHORTCUT:
You can jump directly to this function number by simultaneously
holding down the [METRONOME] button and pressing the [TEMPO/
FUNCTION] button.

Audio Song Playback Volume

470 440
470 440
Setting range: 1 – 20
Default setting: 16
SHORTCUT:
You can also set the value during audio playback by simultaneously
holding down the [TEMPO/FUNCTION] button and using the [-/NO]/
[+/YES] buttons.

MIDI Functions

You can make detailed adjustments to MIDI settings.
For more information about MIDI, see the online
manual "MIDI Basics. "
All MIDI settings described below will affect the MIDI signal in
and out of the USB [TO HOST] connector.

MIDI Transmit Channel

470 440
470 440
In any MIDI control setup, the MIDI channels of the
transmitting and receiving equipment must be matched
for proper data transfer. This parameter enables you to
specify the channel on which the Clavinova transmits
MIDI data.
Setting range: 1 – 16, OFF (not transmitted)
Default setting: 1
NOTE
In Dual mode, Voice 1 data is transmitted on its specified channel. In
Split mode (CLP-470/440/S408/S406), right Voice data is transmitted
on its specified channel. In Dual mode, Voice 2 data is transmitted on
the next greater channel number relative to the specified channel. In
Split mode (CLP-470/440/S408/S406), left Voice data is transmitted on
the next greater channel number relative to the specified channel. In
either mode, no data is transmitted if the transmit channel is set to
"OFF."
430 S408 S406 465GP
430 S408 S406 465GP
430 S408 S406 465GP
430 S408 S406 465GP
430 S408 S406 465GP
430 S408 S406 465GP
NOTE
Song data is not transmitted via the MIDI connections. However,
channels 3 – 16 of non-protected songs will be transmitted via the MIDI
connections depending on the MIDI Song Channel Selection setting
(page 56).

MIDI Receive Channel

470 440
470 440
In any MIDI control setup, the MIDI channels of the
transmitting and receiving equipment must be matched
for proper data transfer. This parameter enables you to
specify the channel on which the Clavinova receives
MIDI data.
Setting range: ALL, 1&2, 1 – 16
Default setting: ALL
NOTE
ALL:
This allows simultaneous reception of different parts on all 16 MIDI
channels, enabling the Clavinova to play multi-channel song data
received from a sequencer or other external device.
1&2:
This allows simultaneous reception on channels 1 and 2 only, enabling
the Clavinova to play 1 and 2 channel song data received from a
sequencer or other external device.
NOTE
Program change and other like channel messages received will not
affect the instrument's panel settings or the notes you play on the
keyboard.
NOTE
No MIDI reception occurs when Demo mode is called up or during file
operations.

Local Control ON/OFF

470 440
470 440
"Local Control" refers to the fact that, normally, the
keyboard controls its internal tone generator, allowing
the internal Voices to be played directly from the
keyboard. This situation is "Local Control On, " since the
internal tone generator is controlled locally by its own
keyboard. Local control can be turned "OFF, " however, so
that the keyboard does not play the internal Voices, but
the appropriate MIDI information is still transmitted via
the MIDI OUT terminal when notes are played on the
keyboard. At the same time, the internal tone generator
responds to MIDI information received via the MIDI IN
terminal.
Setting range: ON/OFF
Default setting: ON
Function Parameters — Various Convenient Settings
430 S408 S406 465GP
430 S408 S406 465GP
430 S408 S406 465GP
430 S408 S406 465GP
Detailed Settings
57