Clp-470 Assembly - Yamaha 440 Owner's Manual

CLP-470 Assembly

Remove all parts from the package and make sure you have all of the items.
Foamed styrol pads
Remove foamed styrol pads from the package, position them on
the floor, then place A on top of them.
Position the pads so that they will not block the speaker box on
the bottom of A.
A bundled pedal cord is attached to the reverse side.
The pedals are covered with vinyl covers when shipped from the
factory. Remove the cover from the damper pedal for optimum
use of the GP Responsive Damper Pedal effect.
D
Appendix
70
Assembling the Clavinova
A
B
C
E
Assembly parts
6 x 20 mm long screws x 4
6 x 16 mm short screws x 6
4 x 12 mm thin screws x 2
4 x 20 mm tapping screws x 4
Cord holders x 2
Headphone hanger
4 x 10 mm thin screws x 2
Headphone hanger
Power cord