Descriptions Of Ipds Bin Selection Numbers; Default Bin Mapping - Lexmark 6500e User Manual

Output Bin 1 – Output Bin 10 – Selects additional standard output bins available on the printer or
optional physical output bins when installed.
Fin High Cap – Selects the optional finisher output bin with the highest capacity. The order of option
installation does not affect the physical bin associated with the Fin High Cap bin value. This value is
always associated with the highest capacity physical bin of the optional finisher.
Bin Mapping 12 = Fin High Cap = IPDS number 25 is a default value on all printers. Assuming the
optional finisher is installed and this default value is not changed, jobs that select IPDS bin number 25 on
the host will always be routed to the finisher bin with the highest capacity.
When hole punching is available in a physical bin, bin selection values may be followed by 'Hp' which
indicates hole punching is available. Examples are: Output Bin 1 Hp, Output Bin 2 Hp, Fin High Cap Hp.
When a value with 'Hp' is selected, all pages in an IPDS job routed to this bin are hole punched. See Hole
Punch on page 63 for additional information.

3.7.2 Descriptions of IPDS Bin Selection Numbers

Host applications select printer physical bins by sending IPDS bin selection numbers ranging from 1 to
255. These IPDS bin numbers may be mapped to any physical bin on the printer by changing the printer
physical bin selected by the IPDS bin selection number. Assuming printer default output bin mapping,
when IPDS number 1 is received in an IPDS job, the pages are routed to the printer Standard Bin. When
IPDS bin selection number 2 is received in an IPDS job, the pages are routed to the second printer
physical output bin.
Bin Mapping 12 = Fin High Cap = IPDS bin selection number 25, is a default value on all printers.
Assuming the optional finisher is installed and this default value is not changed, jobs that select IPDS bin
selection number 25 on the host will always be routed to the finisher bin with the highest capacity.

3.7.3 Default Bin Mapping

The default bin mapping shown below represents a typical relationship between IPDS output bin selection
numbers and the printer physical output bins. The default mapping when optional output bins are installed
on the printer is shown in the table below for all printers. In the table below, the labels Bin Mapping 1-
Bin Mapping 12 refer to the number of the mapping, not the printer physical output bin. All printers do
not support ten optional output bins or an optional finisher. Default settings will be assigned for all output
bins available on your printer.
Bin Mapping No.
Bin Mapping 1
Bin Mapping 2
Bin Mapping 3
Bin Mapping 4
Bin Mapping 5
Bin Mapping 6
Bin Mapping 7
Bin Mapping 8
Bin Mapping 9
Bin Mapping 10
Bin Mapping 11
Bin Mapping 12

Output Bin Value
Standard Bin
Bin 1
Bin 2
Bin 3
Bin 4
Bin 5
Bin 6
Bin 7
Bin 8
Bin 9
Bin 10
Fin High Cap

IPDS (Bin Selection) Number
1
2
3
4
5
6
7
8
9
10
11
25
37