Canon 1827B001 Reference Manual page 38

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Log In Mode
For Department ID Management
E N T E R D E P T . I D
For User ID Management
E N T E R U S E R I D : a
- Depending on your needs, you can change the standby display which
appears when the main power switch is turned on. For details, see
"Setting Menu, " on p. 11-6.
- When the main power switch is turned on, the LCD displays <PLEASE
WAIT> first, and then displays <INITIALIZING...> until the standby display
appears. It is also possible to see the standby display without having
<INITIALIZING...> shown.
- If the Auto Clear function is activated, the display returns to the standby
mode.
- Log in mode is displayed only when Department/User ID Management is
set to <ON> in <SYSTEM SETTINGS>. To log in or out, see "Department/
User ID Management, " on p. 1-12.
Back Previous Next
TOP
1-11