Biostar P4SFA Bios Setup Manual page 24

P4SFA BIOS Setup
MACPME Power Up Control
This item allows you to control the MACPME Power Up.
The Choices: Enabled, Disabled (default).
PCIPME Power Up Control
This item allows you to control the PCIPME Power Up.
The Choices: Enabled, Disabled (default).
Power Up by Alarm
When you select Enabled, fields appear that let you set the alarm that returns the
system to Full On state.
The Choices: Disabled (default), Enabled.
Month Alarm
Select a month (1-12) or NA if you want the alarm active during all months
Day of Month Alarm
Select a date in the month. Select 0 if you prefer to set a weekly alarm.
Time (hh:mm:ss) Alarm
Set the time you want the alarm to go off on the days when it is activated.
Reload Global Timer Events
Reload Global Timer Events are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awaken the system from such a mode. In effect, the
system remains alert for anything, which occurs to a device, which is configured as Enabled,
even when the system is in a power down mode.
Primary IDE
Secondary IDE
FDD, COM, LPT Port
PCI, PIRQ[A-D]#
Delay Prior to Thermal
The Choices: None (default), 1Min, 2Min, 4Min, 8Min, 16Min, 32Min, 64Min.
Disabled (default), Enabled.
Disabled (default), Enabled.
Disabled (default), Enabled.
Disabled (default), Enabled.
23