Biostar P4SFA Bios Setup Manual page 12

P4SFA BIOS Setup
Typematic Rate (Chars/Sec)
Sets the rate at which a keystroke is repeated when you hold the key down.
The Choices: 6 (default), 8,10,12,15,20,24,30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the keystroke.
The Choices: 250 (default), 500,750,1000.
Security Option
This option will enable only individuals with passwords to bring the system online and/or
to use the CMOS Setup Utility.
System
Setup (default)
This will only apply if passwords are set from the Setup main menu.
APIC Mode
This option allows you to enable or disable the APIC (Advanced Programmable Interrupt
Control).
The Choices: Enabled (default), Disabled.
MPS Version Control For OS
The BIOS supports version 1.1 and 1.4 of the Intel Multi-Processor Specification.
Select version supported by the operation system running on this computer.
The Choices: 1.4 (default), 1.1.
OS Select For DRAM > 64MB
A choice other than Non-OS2 is only used for OS2 systems with memory exceeding 64MB.
The Choices: Non-OS2 (default), OS2.
HDD S.M.A.R.T. Capability
This item allows you to enable/disable the S.M.A.R.T. function of the hard disk.
The Choices: Disabled (default), Enabled.
Report No FDD For WIN 95
Whether report no FDD for WIN 95 or not.
The Choices: No (default), Yes.
Video BIOS Shadow
Determines whether video BIOS will be copied to RAM for faster execution.
Enabled (default)
Disabled
A password is required for the system to boot and is
also required to access the Setup Utility.
A password is required to access the Setup Utility
only.
Optional ROM is enabled.
Optional ROM is disabled.
11