Table of Contents
Advertisement
P4SFA BIOS Setup
IDE Burst Mode
This item allows you enable/disable IDE Burst Mode.
The Choices: Enabled (default), Disabled.
SIS OnChip PCI Device
If you highlight the literal "Press Enter" next to the "SIS
then press the enter key, it will take you a submenu with the following options:
SIS USB Controller
This option allows you to control SIS USB Controlller.
The Choices: Enabled (default), Disabled.
USB Ports Number
This option allows you to control USB Ports Number.
The Choices: 6 (default), 5, 4, 3.
USB 2.0 Supports
This option allows you to enabled or disabled USB2.0 Supports.
The Choices: Disabled, Enabled (default).
USB Keyboard Support
Enables support for USB attached keyboards.
The Choices: Disabled (default), Enabled.
SIS AC97 Audio
This option allows you to control the onboard AC97 Audio.
The Choices: Auto (default), Disabled.
SIS S/W Modem
This option allows you to control the onboard S/W Modem.
The Choices: Auto (default), Disabled.
SIS 10/100M ETHERNET
This option allows you to control the 10/100M Ethernet.
The Choices: Auto (default), Disabled.
SIS MAC Address Input
Onboard SuperIO Device
If you highlight the literal "Press Enter" next to the "Onboard
then press the enter key, it will take you a submenu with the following options:
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If install and FDC or the system has no
floppy drive, select Disabled in this field.
The Choices: Enabled (default), Disabled.
OnChip PCI Device
Super IO Device
16
" label and
" label and
Advertisement
Table of Contents
