Biostar P4SFA Description
Biostar P4SFA Description

Biostar P4SFA Description

Biostar p4sfa motherboard: user guide
Hide thumbs Also See for P4SFA:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

P
4
S
F
A
P
4
S
F
A
P
4
S
F
A
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the contents
here of and specially disclaims any implied warranties of merchantability or
fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here of without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole is not allowed without first
obtaining the vendor's approval in writing.
The content of this user's is subject to be changed without notice and we will not
be responsible for any mistakes found in this user's manual. All the brand and
product names are trademarks of their respective companies.
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P4SFA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Biostar P4SFA

  • Page 1 FCC Statement and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 2: Table Of Contents

    Características del P4SFA ... 12 Contenido del Paquete... 13 Disposición del P4SFA para Versión 2.1 ... 14 Disposición del P4SFA para Versión 3.0 en adelante ... 15 Instalación del CPU ... 16 Módulos DDR DIMM: DDR1-2... 17 Conectores, Cabezales, Puentes y Ranuras... 18 DEUTSCH ...
  • Page 3: English

    English P4SFA Features Supports Intel Pentium 4 Running at Fuzzy 533 MHz Front Side Bus frequency. Chipset North Bridge: SIS 650. South Bridge: SIS 962L. Main Memory Supports up to 2 DDR devices. Supports 200/ 266/ Fuzzy 333 MHz/ Fuzzy 533 (without ECC).
  • Page 4: Package Contents

    Supports 1 multi-mode parallel port. (SPP/EPP/ECP mode) Supports PS/2 mouse and PS/2 keyboard. Supports 1 vertical audio port. Supports 4 rear USB2.0 ports and 2 front USB2.0 ports. BIOS AWARD legal Bios. Supports APM1.2. Supports ACPI. Supports USB Function. Operating System Offers the highest performance for Windows 98SE, Windows 2000, Windows Me, Windows XP, LINUX and SCO UNIX.
  • Page 5: Layout Of P4Sfa For Version 2.1

    Layout of P4SFA for Version 2.1 JKBMS1 JUSBV2 & Mouse JUSB1 JCOM1 JPRNT1 ITE I/O BIOS JVGA1 USB & LAN JUSBV3 JUSBLAN2 JAUDIO JAUDIO1 PCI1 CODEC JGAME1 JCDIN1 PCI2 AMR1 JCFAN1 Socket 478 SIS 650 AGP1 JUSBV1 JUSB2 962L JCI1...
  • Page 6: Layout Of P4Sfa For Version 3.0 And Above

    Layout of P4SFA for Version 3.0 and above JKBMS1 JUSBV2 & Mouse JUSB1 JCOM1 JPRNT1 ITE I/O BIOS JVGA1 USB & LAN JUSBV3 JUSBLAN2 JAUDIO JAUDIO1 PCI1 CODEC JGAME1 JCDIN1 PCI2 SPDIF_OUT1 JWOL1 JCDIN2 PCI3 JCFAN1 JATXPWR2 Socket 478 SIS 650...
  • Page 7: Cpu Installation

    CPU Installation Pull the lever sideways away from the socket then raise the lever up to 90-degree angle. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert the CPU. Press the lever down.
  • Page 8: Ddr Dimm Modules: Ddr1-2

    DDR DIMM Modules: DDR1-2 DRAM Access Time: 2.5V Unbuffered DDR 200/266/Fuzzy 333 MHz Type required. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin) DIMM Socket DDR Module Location DDR 1 64MB/128MB/256MB/512MB/1GB DDR 2 64MB/128MB/256MB/512MB/1GB * The list shown above for DRAM configuration is only for reference. How to install a DIMM Module DDR DIMM Module 1.
  • Page 9: Jumpers, Headers, Connectors & Slots

    Jumpers, Headers, Connectors & Slots Hard Disk Connectors: IDE1/ IDE2 The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA / 33/ 66/ 100 / 133 functionality. It has two HDD connectors IDE1 (primary) and IDE2 (secondary).
  • Page 10 Power Connectors: JATXPWR1/ JATXPWR2 JATXPWR2 (ATX 12V Power Connector) (ATX Main Power Connector) Wake On LAN Header: JWOL1 Front USB Header: JUSB2 Pin Assignment Pin Assignment JUSB2 5V/ 5VSB Selection for USB: JUSBV1/ JUSBV2 JUSBV3 JATXPWR1 Ground 5V_SB Wake up JWOL1 Data (-) Data (-)
  • Page 11 Front PanelConnector: JPANEL1 Audio Subsystem: JAUDIO1/ JCDIN1/ JCDIN2=> only for version 3.0 and above JCDIN2 => only for Version 3.0 (CD-ROM Audio-In Header) Assignment Mic In Mic Power RT Line Out Reserved LFT Line Out RT Line In LFT Line In PWR_LED ON/OFF (+) (-)
  • Page 12: Clear Cmos

    Front Panel Audio Connector/ Jumper Block Jumper Setting Pin 5 and 6 Audio line out signals are routed Pin 9 and 10 to the back panel audio line out connector. Pin11 and 12 Pin13 and 14 No jumpers Audio line out and mic in signals are installed available for front panel audio connectors.
  • Page 13 Game Header: JGAME1 (Optional) Pin Assignment Pin Assignment MIDI-OUTR MIDI-INR Case Open Connector: JCI1 JCI1 No jumper installed Pin 1-2 on Back Panel Connectors JKBMS1 JPRNT1 Mouse PS/2 Parallel Port JUSB1 Keyboard COM1 PS/2 JCOM1 JGAME1 Ground Ground Assignment Normal Operation (default) Case Open...
  • Page 14: Español

    Español Características del P4SFA Soporta procesador Intel Pentium 4 Corre a Fuzzy 533 MHz Front Side Bus. Chipset North Bridge: SIS 650. South Bridge: SIS 962L. Memoria Principal Soporta hasta 2 dispositivos DDR. Soporta 200/ 266/ Fuzzy 333 MHz/ Fuzzy 533 (sin ECC).
  • Page 15: Contenido Del Paquete

    Soporta ratón PS/2 y teclado PS/2. Soporta 1 puerto de audio vertical. Soporta 4 puertos USB2.0 traseros y 2 puertos USB2.0 frontales. BIOS AWARD legal Bios. Soporta APM1.2. Soporta ACPI. Soporta función USB. Sistema Operativo Ofrece el más alto funcionamiento en Windows 98SE, Windows 2000, Windows Me, Windows XP, LINUX y SCO UNIX.
  • Page 16: Disposición Del P4Sfa Para Versión 2.1

    Disposición del P4SFA para Versión 2.1 JKBMS1 JUSBV2 Teclado & Raton JUSB1 JCOM1 JPRNT1 ITE I/O BIOS JVGA1 USB & LAN JUSBV3 JUSBLAN2 JAUDIO JAUDIO1 PCI1 CODEC JGAME1 JCDIN1 PCI2 AMR1 JCFAN1 Socket 478 SIS 650 AGP1 JUSBV1 JUSB2 962L...
  • Page 17: Disposición Del P4Sfa Para Versión 3.0 En Adelante

    Disposición del P4SFA para Versión 3.0 en adelante JKBMS1 JUSBV2 & Mouse JUSB1 JCOM1 JPRNT1 ITE I/O BIOS JVGA1 USB & LAN JUSBV3 JUSBLAN2 JAUDIO JAUDIO1 PCI1 CODEC JGAME1 JCDIN1 PCI2 SPDIF_OUT1 JWOL1 JCDIN2 PCI3 JCFAN1 JATXPWR2 Socket 478 SIS 650...
  • Page 18: Instalación Del Cpu

    Instalación del CPU Tire de la palanca del lado del zócalo, luego levante la palanca hasta un ángulo de 90 grados. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la CPU. Empareje el contacto A con el punto blanco/ corte del borde, luego inserte la CPU. Presione la palanca para abajo.
  • Page 19: Módulos Ddr Dimm: Ddr1-2

    Módulos DDR DIMM: DDR1-2 DRAM Tiempo de Acceso: 2.5V Unbuffered DDR 200/266/Fuzzy 333 MHz Tipo requerido. DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulo DIMM (184 contactos) Localización Módulo DDR del Módulo DIMM DDR 1 64MB/128MB/256MB/512MB/1GB DDR 2 64MB/128MB/256MB/512MB/1GB * La lista de arriba para la configuración DRAM es solamente para referencia.
  • Page 20: Conectores, Cabezales, Puentes Y Ranuras

    Conectores, Cabezales, Puentes y Ranuras Conectores del Disco Duro: IDE1/ IDE2 La placa madre tiene un controlador de 32-bit PCI IDE que proporciona Modo PIO 0~4, Bus Master, y funcionalidad Ultra DMA 33/ 66/ 100/ 133. Tiene dos conectores HDD IDE1 (primario) y IDE2 (secundario). El conector IDE puede conectar a un master y un drive esclavo, así...
  • Page 21 Conectores de Corriente: JATXPWR1/ JATXPWR2 JATXPWR2 (ATX 12V Conector de Corriente) (ATX Conector de Corriente Principal) Cabezal Wake On LAN: JWOL1 Cabezal Frontal USB: JUSB2 Contactos Asignacion Contactos Asignacion Data (-) Data (+) Tierra 5V/ 5VSB Selección para USB: JUSBV1/ JUSBV2 JUSBV3 JATXPWR1 Tierra...
  • Page 22 Conector del Panel Frontal: JPANEL1 PWR_LED (+) (-) HLED ==> Conector de Altavoz HLED ==> LED del Disco Duro ==> Boton de Reinicio ==> Conector Infrarojo ==> Boton de Suspension PWR_LED ==> Corriente LED ON/ OFF ==> Boton de Encendido Subsistema de Audio: JAUDIO1/ JCDIN1/ JCDIN2=>...
  • Page 23 Contactos Asignacion Entrada del MIC Corriente del MIC RT Salida de Linea Reservado LFT Salida de Linea RT Entrada de Linea LFT Entrada de Linea Conector del Panel Frontal de Audio/ Jumper Block Jumper Setting Contacto 5 & 6 La senal de salida de linea del Audio Contacto 9 &...
  • Page 24 Conector Digital de Audio: SPDIF_OUT1 SPDIF_OUT SPDIF_OUT1 Puente de Borrar CMOS: JCMOS1 JCMOS1 Contacto 1-2 on Contacto 2-3 on Cabezal de Juego: JGAME1 (Opcional) Contactos Asignacion Contactos Asignacion MIDI-OUTR MIDI-INR Asignacion Operacion Normal (Default) Borrar Datos CMOS JGAME1...
  • Page 25 Conector de la Carcasa Abierta: JCI1 JCI1 Puente sin instalar Contacto 1-2 on Conector del Panel Trasero JKBMS1 JPRNT1 PS/2 Mouse Puerto Paralelo JUSB1 PS/2 COM1 Keyboard JCOM1 Asignacion Operacion Normal (default) Carcasa Abierta JUSBLAN2 VGA1 JVGA1 JAUDIO Entrada de Linea Salida de Altavoz...
  • Page 26: Deutsch

    Deutsch Merkmale des P4SFA Unterstützung für den Intel Pentium 4 GHz. FSB 533 MHz . Chipsatz Northbridge: SIS 650. Southbridge: SIS 962L. Main Memory Unterstützung für 2 DDR Geräte. Unterstützung für 200/ 266/ Fuzzy 333 MHz/ Fuzzy 533(ohne ECC). Die maximale Speichergröße ist i2GB.
  • Page 27: Verpackungsinhalt

    1 LAN-Schnittstelle (optional). 1 parallele Schnittstelle mit Unterstützung für SPP/EPP/ECP -Modus Unterstützung für PS/2-Maus und PS/2 -Tastatur. 1 vertikale Audio-Sschnittstelle. 4 USB2.0-Ports auf der Rückwand und 2 USB2.0-Ports auf der Vorderseite. BIOS Unterstützung für AWARD legal Bios. Unterstützung für APM1.2. Unterstützung für ACPI.
  • Page 28: Layout Von P4Sfa (Für Version 2.1)

    Layout von P4SFA (für Version 2.1) JKBMS1 JUSBV2 & Mouse JUSB1 JCOM1 JPRNT1 ITE I/O BIOS JVGA1 USB & LAN JUSBV3 JUSBLAN2 JAUDIO JAUDIO1 PCI1 CODEC JGAME1 JCDIN1 PCI2 AMR1 JCFAN1 Sockel 478 SIS 650 AGP1 JUSBV1 JUSB2 962L JCI1...
  • Page 29: Layout Von P4Sfa (Für Version 3.0 Und Danch)

    Layout von P4SFA (für Version 3.0 und danch) JKBMS1 JUSBV2 & Mouse JUSB1 JCOM1 JPRNT1 ITE I/O BIOS JVGA1 USB & LAN JUSBV3 JUSBLAN2 JAUDIO JAUDIO1 PCI1 CODEC JGAME1 JCDIN1 PCI2 SPDIF_OUT1 JWOL1 JCDIN2 PCI3 JCFAN1 JATXPWR2 Sockel 478 SIS 650...
  • Page 30: Installation Der Cpu

    Installation der CPU Ziehen Sie den Hebel seitwärts von der Sockel und neigen Sie ihn um 90-Grad nach oben. Suchen Sie Pin A im Sockel und den weißen Punkt oder die Abschnittkante in der CPU. Passen Sie Pin A mit dem weißen Punkt/der Abschnittkante zusammen und legen Sie danach die CPU ein.
  • Page 31: Ddr-Dimm-Modules: Ddr1-2

    DDR-DIMM-Modules: DDR1-2 DRAM Zugriffszeit: 2.5V unbuffer DDR 200/266/ Fuzzy 333 MHz Typen erfordert. DRAM Typen: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM-Module (184 pin) DIMM- Sockel DDR-Module Standort DDR 1 64MB/128MB/256MB/512MB/1GB DDR 2 64MB/128MB/256MB/512MB/1GB * Die obergezeigt Liste für DRAM-Konfiguration ist nur als Referenz. Installation von DIMM-Modulen DDR-DIMM-Module Es gibt...
  • Page 32: Jumpers, Headers, Connectors & Slots

    Bandkabel des Diskettenlaufwerks. Accelerated Graphics Port Slot: AGP1 Ihr Monitor wird direkt an die Grafikkarte angeschlossen. Dieses Motherboard unterstützt Grafikkarten für PCI-Slots, aber es ist auch mit einem Accelerated Graphics Port ausgestattet. AGP-Karten verwenden die AGP-Technologie, um die Wirksamkeit und Leistung von Videosignalen zu verbessern, besonders wenn es sich um 3D-Grafiken handelt.
  • Page 33 Stromversorgungsanschlüssü: JATXPWR1/ JATXPWR2 Wake On LAN Header: JWOL1 Front USB Header: JUSB2 Auswahl von 5V/ 5VSB fürUSB: JUSBV1/ JUSBV2JUSBV3...
  • Page 34 Anschlüsse auf der Vorderseite:JPANEL1 Audio Subsystem: JAUDIO1/ JCDIN1/ JCDIN2=> gilt für Version 3.0 und danch...
  • Page 35 Digital Audio Connector: SPDIF_OUT1 Jumper zum Löschen des CMOS: JCMOS1...
  • Page 36 Game Header: JGAME1 (Optional) Jumper zum Gehäuse-Öffnen: JCI1 Anschlüsse auf der Rückwand JKBMS1 JPRNT1 Maus PS/2 Parallel JUSB1 Tastatur COM1 PS/2 JCOM1 JUSBLAN2 Line In Lautsprecher-Ausgang MIC In VGA1 JVGA1 JAUDIO...
  • Page 37: Trouble Shooting

    Trouble Shooting PROBABLE No power to the system at all Power light don’t illuminate, fan inside power supply does not turn on. Indicator light on keyboard does not turn on PROBABLE System inoperative. Keyboard lights are on, power indicator lights are lit, hard drive is spinning.
  • Page 38: Solución De Problemas

    Solución de Problemas CAUSA PROBABLE No hay corriente en el sistema. La luz de corriente no ilumina, ventilador dentro de la fuente de alimentación apagada. Indicador de luz del teclado apagado. CAUSA PROBABLE Sistema inoperativo. Luz del teclado encendido, luz de indicador de corriente iluminado, disco rígido está...
  • Page 39: Problemlösung

    Problemlösung MÖGLICHE URSACHE Das System hat keine Spannungsversorgung. Die Stromanzeige leuchtet nicht, der Lüfter im Inneren Stromversorgung wird eingeschaltet. Tastaturleuchten sind nicht an. MÖGLICHE URSACHE System funktioniert nicht. Tastaturleuchten sind an, die Stromanzeige leuchtet, die Festplatte dreht sich. MÖGLICHE URSACHE Das System wird von der Festplatte nicht hochgefahren, vom CD-ROM-Treiber aber ja.
  • Page 40 04/4/2003...

Table of Contents