Table of Contents
Advertisement
P4SFA BIOS Setup
CPU L2 Cache ECC Checking
This item allows you to enable/disable CPU L2 Cache ECC Checking.
The Choices: Enabled (default), Disabled.
Quick Power On Self Test
Enabling this option will cause an abridged version of the Power On Self-Test (POST) to
execute after you power up the computer.
Enabled (default)
Disabled
First /Second/Third/ Boot Other Device
These BIOS attempts to load the operating system from the devices in the sequence
selected in these items.
The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3,
ZIP100, LAN, HPT370, Enabled, Disabled.
Swap Floppy Drive
For systems with
two floppy drives, this option allows you to swap logical drive
assignments.
The Choices: Enabled, Disabled (default).
Boot Up Floppy Seek
Enabling this option will test the floppy drives to
Disabling this option reduces the time it takes to boot-up.
The Choices: Enabled (default), Disabled.
Boot Up NumLock Status
Selects the NumLock. State after power on.
On (default)
Off
Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
Normal
Fast (default)
Typematic Rate Setting
When a key is held down, the keystroke will repeat at a rate determined by the keyboard
controller. When enabled, the typematic rate and typematic delay can be configured.
Disabled (default)
Enabled
Enable quick POST.
Normal POST.
determine if they have 40 or 80 tracks.
Numpad is number keys.
Numpad is arrow keys.
A pin in the keyboard controller
controls Gate A20.
Lets chipset control Gate A20.
10
Advertisement
Table of Contents
