Table of Contents
Advertisement
P4SFA BIOS Setup
Switch Function
You can choose whether or not to permit your system or enter complete suspend mode.
Suspend mode offers greater power savings, with a correspondingly longer with a
correspondingly longer awakening period.
The Choices: Break/ Wake (default), Disabled.
Modem Use IRQ
This determines the IRQ, which can be applied in MODEM use.
The Choices: Auto (default), 3, 4, 5, 7, 9, 10, 11, NA.
Hot Key Function As
This item allows you select Hot Key Function As Power Off (Ctrl-Alt-Backspace).
The Choices: Power Off (default), Suspend, Disabled.
HDD Off After
After a selected period of drive inactivity, the hard disk drive will power down while all
other devices remain active.
The Choices: Disabled (default), 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7
Min, 8 Min, 9 Min, 10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15 Min.
Power Button Override
When you select Delay 4 sec, pressing the power button for more than 4 seconds forces the
system to enter the Soft-Off state.
The Choices: Instant Off (default), Delay 4 Sec.
Power State Resume Control
This item allows you to select Power State Resume Control.
The Choices: Always off (default), Always on, Keep Pre-State.
PM Wake Up Events
If you highlight the literal "Press Enter" next to the "PM Wake Up Events" label and then
press the enter key, it will take you a submenu with the following options:
IRQ [3-7, 9-15], NMI
This item allows you enable/disable IRQ [3-7,9-15] NMI.
The Choices: Enabled (default), Disabled.
IRQ 8 Break Suspend
This item allows you enable/disable IRQ8 Break Suspend.
The Choices: Disabled (default), Enabled.
RING/ WOL Power Up Control
This item allows you to control the RING Power Up.
The Choices: Enabled, Disabled (default).
22
Advertisement
Table of Contents
