Table of Contents
Advertisement
P4SFA BIOS Setup
2. Suspend Mode.
There are four options of Power Management, three of which have fixed mode settings
Min. Power Saving
Minimum power management.
Suspend Mode = 1 hr.
Max. Power Saving
Maximum power management only available for sl CPU's.
Suspend Mode = 1 min.
User Defined (default)
Allows you to set each mode individually.
When not disabled, each of the ranges are from 1 min. to 1 hr.
Suspend Mode
The item allows you to select the suspend type under ACPI operating system.
The Choices: Disabled (default), 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 20 Min,
Video Off Option
This field determines when to activate the video off feature for monitor power
management.
The Choices: Suspend → Off, Always on, Susp, Stby Off (Default), All
Video Off Method
This option determines the manner in which the monitor is goes blank.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS Supported
Initial display power management signaling.
30 Min, 40 Min, 1 Hour.
modes Off.
(default)
21
Advertisement
Table of Contents
