Power Source Headers For Usb Ports - Biostar P4M900-M7 FE Setup Manual

JUSBV1/JUSBV2: Powe r Source Heade rs for USB Ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at JUSB1/JUSBLAN1.
JUSBV2: +5V for USB ports at f ront panel (JUSB2/JUSB3).
Pin 2-3 Close:
JUSBV1: USB ports at JUSB1/JUSBLAN1 are powered by +5V standby
v oltage.
JUSBV2: USB ports at front panel (JUSB2/JUSB3) are powered by +5V
standby v oltage.
Note:
In order to support this function "Power-On system via USB device," "JUSBV1/ JUSBV2"
jumper cap should be placed on Pin 2-3 indi viduall y .
JUSBV1
1 3
JUSBV2
1 3
P4M900-M7 FE
1 3
Pin 1-2 close
1 3
Pin 2-3 close
19