Power Source Headers For Usb Ports; For Ps/2 Keyboard/Mouse - Biostar GF7025-M2 TE Setup Manual

Motherboard Manual
JUSBPWR1/JUSBPWR2: Powe r Source Heade rs for USB Ports
Pin 1-2 Close:
JUSBPWR1: +5V for USB ports at JUSB1/JUSBLAN1.
JUSBPWR2: +5V for USB ports at f ront panel (JUSB2/JUSB3/JUSB4).
Pin 2-3 Close:
JUSBPWR1: USB ports at JUSB1/JUSBLAN1 are powered by +5V standby
JUSBPWR2: USB ports at front panel (JUSB2/JUSB3/JUSB4) are powered
Note:
In order to support this func tion "Power-On s ys tem via U SB device," "JUSBPWR 1/
JUSBPWR 2" jumper c ap s hould be placed on Pi n 2-3 indi viduall y .
JKBMSPWR1: Power Source Heade r for PS/2 Ke yboard and Mouse
Note:
In order to support this func tion "Power-on s ystem via keyboar d and mouse",
"JKBMSPWR1" j umper cap s houl d be placed on Pi n 2-3.
20
v oltage.
by +5V standby voltage.
JUSBPWR1
3
1
3
1
JUSBPWR2
1 3
3
1
Pin 1-2 close
3
1
Pin 2-3 close
1 3
Pin 1-2 close
+5V for PS/2 keyboard and
mouse.
1 3
Pin 2-3 close
PS/2 keyboard and mouse are
powered by +5V standby
voltage.