Pci Pnp; Power Menu; Suspend Mode; Acpi 2.0 Support - Asus AT4NM10-I User Manual

2.4.5

PCI PnP

The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.
The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA
devices, and setting the memory size block for legacy ISA devices.
Take caution when changing the settings of the PCI PnP menu items. Incorrect field values
can cause the system to malfunction.
Plug and Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if you
install a Plug and Play operating system, the operating system configures the Plug and Play
devices not required for boot. Configuration options: [No] [Yes]
2.5

Power menu

The Power menu items allow you to change the settings for the Advanced Power
Management (APM). Select an item then press <Enter> to display the configuration options.
Main Advanced

Suspend Mode

ACPI 2.0 Support

ACPI APIC Support

Control EuP
APM Configuration
Hardware Monitor
2.5.1 Suspend Mode [S3 Only]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend. Configuration option: [S3 Only]
[S3 Only] - Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state
(default). In S3 sleep state, the system appears to be off and consumes less power
than in the S1 state. When signaled by a wake-up device or event, the system resumes
to its working state exactly where it was left off.
2.5.2 ACPI 2.0 Support [Enabled]
Allows you to add more tables for Advanced Configuration and Power Interface (ACPI) 2.0
specifications. Configuration options: [Disabled] [Enabled]
2.5.3 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI)
support in the Application-Specific Integrated Circuit (ASIC). When set to Enabled, the ACPI
APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
ASUS AT4NM10-I
BIOS SETUP UTILITY
Power Boot Tools
[S3 only]
[Disabled]
[Enabled]
[Disabled]
Exit
Select the ACPI state
used for System
Suspend.
2-10