Exit Menu - Asus AT4NM10-I User Manual

Reset User Data [No]
Allows you to clear Express Gate's user data. Configuration options: [No] [Reset]
When setting this item to [Reset], ensure to save the setting to the BIOS so that the
user data will be cleared the next time you enter the Express Gate. User data includes
the Express Gate's settings as well as any personal information stored by the web
browser (bookmarks, cookies, browsing history, etc.). This is useful in the rare case
where corrupt settings prevent the Express Gate environment from launching properly.
The first time wizard will run again when you enter the Express Gate environment after
clearing its settings.
2.7.3 AI NET 2
Check Realtek LAN cable [Disabled]
Enables or disables checking of the Realtek LAN cable during the Power-On Self-Test
(POST). Configuration options: [Disabled] [Enabled]
2.8

Exit menu

The Exit menu items allow you to load the optimal or failsafe default values for the BIOS
items, and save or discard your changes to the BIOS items.
Main Advanced
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
Pressing <Esc> does not immediately exit this menu. Select one of the options from this
menu or <F10> from the legend bar to exit.
2-15
BIOS SETUP UTILITY
Power Boot Tools Exit
Exit system setup
Exit system setup
after saving the
after saving the
changes.
changes.
F10 key can be used
F10 key can be used
for this operation.
for this operation.
+-
Enter Go to Sub-screen
F1
F1
F10
F10
ESC
ESC
Select Screen
Select Screen
Select Item
Select Item
Change Option
General Help
General Help
Save and Exit
Save and Exit
Exit
Exit
Chapter 2: BIOS information